This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Bearing identification question
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 916
- Joined: Sun Apr 08, 2007 7:47 pm
- Zip Code: 47631
- Tractors Owned: 1955 Cub w/9 different 1 point implements
1948 Cub
1948 McCormick W-6
1949 H
1949 M
1961 560 w/ 412 fast hitch plow
1966 140
1973 666
Allis Chalmers C w/sickle mower
Case 400
Economy 14 hp tractor - Location: IN, New Harmony
Bearing identification question
I was going through my box of cub parts last night and found an unfamiliar bearing and can't seem to cross it to anything. The manufacturer is Nachi Quest and the part number is 6205 ZZE. It is a sealed bearing. Does anyone recognize this as a cub bearing or did I put it in my parts box by mistake?
-
- Team Cub
- Posts: 17314
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: Bearing identification question
Is it about 1" ID? Probably the PTO. I believe their ZZE is double shielded, not sealed.
-
- 10+ Years
- Posts: 5237
- Joined: Tue Jan 12, 2010 2:08 pm
- Zip Code: 12514
- Circle of Safety: Y
Re: Bearing identification question
6205 is a common #, trans imput I believe, as Jim said the letters are for different types of sheilding
-
- 10+ Years
- Posts: 916
- Joined: Sun Apr 08, 2007 7:47 pm
- Zip Code: 47631
- Tractors Owned: 1955 Cub w/9 different 1 point implements
1948 Cub
1948 McCormick W-6
1949 H
1949 M
1961 560 w/ 412 fast hitch plow
1966 140
1973 666
Allis Chalmers C w/sickle mower
Case 400
Economy 14 hp tractor - Location: IN, New Harmony
Re: Bearing identification question
Jim, I believe you are correct. It is approximately 1" ID and 1 7/8" OD.
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Rear input shaft bearing shields-- question Attachment(s)
by Bob McCarty » Wed Jan 03, 2024 7:43 pm » in Farmall Cub - 2
- 754
-
by Bob McCarty
Thu Jan 04, 2024 6:21 pm
-
-
- 7
- 456
-
by Glen
Sun Oct 10, 2021 4:40 pm
-
-
Need help with identification Attachment(s)
by Nosparkplug » Thu Mar 09, 2023 3:43 pm » in Farmall Cub - 3
- 223
-
by Don McCombs
Thu Mar 09, 2023 6:42 pm
-
-
- 11
- 459
-
by spaceghost
Sun Sep 05, 2021 9:35 am
-
- 8
- 293
-
by tst
Fri May 10, 2024 6:58 pm
Who is online
Users browsing this forum: No registered users and 3 guests