Bolts Sizes

[Pap]

I am missing some bolts and others are broken off of my '47. Is there a list that tells of the different bolts sizes on the whole tractor ?

[indy61]

The TC-37 parts manual will list every bolt/screw/etc ,along with quantity, in the description for each individual part.

[tst]

the manual can be a little confusing for finding them, you have to look at the part you want to bolt to and it will tell you the bolt needed for that part under the part description

[Pap]

Ok thanks. indy61 & tst. I will check that out. I do need some bolts in different places on the tractor.

[Pap]

Hey I downloaded it but I can't get it to open where I can see it. Can y'all tell me what I need to do different.

[Don McCombs]

The file is in PDF format. You need to have Adobe Acrobat Reader installed to be able to open it. Do you have that?

[Pap]

No I don't. Thanks Don . I will get it. Thank You very much.

[Pap]

Hey Don I downloaded the reader and this is the message that I got. I must be doing something wrong but I don't know what. I appreciate your help. Thanks.

[Crimson Tim]

Also, depending on what you are missing, TM Tractor has a pretty thorough pictorial on what bolts are required and where they go for different years. I’m thinking of the various bolts and screws that hold the hood on, for example.

[Glen]

Hi,
Below is TC-37F, it is one of the newer Cub and Loboy parts manuals, made in the 1970's, I think.
Most years of Cubs are in it.
It tells the bolt info in the descriptions where the part numbers are.

http://www.farmallcub.info/galleries/ci ... _Rev_3.asp

Below is TC-37A, made in 1949, it says on the back page, if you would rather have that.

http://www.farmallcub.info/galleries/ci ... TC-37A.asp

[Don McCombs]

Try downloading it again.

[Pap]

Thanks Glen and Don.
That is exactly what I needed !!!!
I am missing a lot of different bolts at different places on it. My uncle "Bless his Heart " he had health problems and he did he not take very good care of it. Bolts missing , bolts broken , wrong bolts in the wrong hole and so on and so on. I guess he tried.
Thanks again for your help.