Final drive seals
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- Cub Star
- Posts: 88
- Joined: Sun May 19, 2019 6:27 pm
- Zip Code: 63783
- Tractors Owned: 1953 Cub
1957? Cub
Farmall H (long term project)
1947 Plymouth (project)
1947 2N ford - Circle of Safety: Y
Final drive seals
I removed the finals from my 2.0 Cub this evening to replace the transmission seals and gaskets on the finals. Does anyone have any cross reference numbers for the seals and gaskets on the finals and transmission? I plan on replacing everything while they are off and would like to purchase my parts from my local napa store if possible.
-
- 10+ Years
- Posts: 7752
- Joined: Tue Feb 15, 2005 10:10 am
- Zip Code: 71023
- Circle of Safety: Y
- Location: LA, Doyline
Re: Final drive seals
Just go to the farmall search (in the blue) at top of page and type in cross reference and about 10 lines down there are a bunch of numbers.
1975 cub (LouAnn) serial # 245946, 1941 John Deere Model H
Good judgment comes from experience,
and a lot of that comes from bad judgment. Will Rogers
Good judgment comes from experience,
and a lot of that comes from bad judgment. Will Rogers
-
- 10+ Years
- Posts: 803
- Joined: Tue Apr 17, 2012 7:55 pm
- Zip Code: 47119
- Skype Name: ntrenn
- Tractors Owned: 63 Cub 221833 in family since '69
65 Lo-boy 19648 with an un-stuck #4 - it lives!!!
144 Cultivators with disc hillers
193 Plow
42C mower
59L mower mounted on the Fcub
23A Disc - lost possession - Circle of Safety: Y
- Location: Indiana
Re: Final drive seals
Pretty sure 450043 is the seal. Usually available but not in stock at Oreilly and others
-
- Cub Star
- Posts: 88
- Joined: Sun May 19, 2019 6:27 pm
- Zip Code: 63783
- Tractors Owned: 1953 Cub
1957? Cub
Farmall H (long term project)
1947 Plymouth (project)
1947 2N ford - Circle of Safety: Y
Re: Final drive seals
Is 450043 the seal that goes on the side of the transmission where the axle shaft goes in. I found the cross reference information but in my parts book the factory number for the seal that goes there is a different number.
-
- 10+ Years
- Posts: 803
- Joined: Tue Apr 17, 2012 7:55 pm
- Zip Code: 47119
- Skype Name: ntrenn
- Tractors Owned: 63 Cub 221833 in family since '69
65 Lo-boy 19648 with an un-stuck #4 - it lives!!!
144 Cultivators with disc hillers
193 Plow
42C mower
59L mower mounted on the Fcub
23A Disc - lost possession - Circle of Safety: Y
- Location: Indiana
Re: Final drive seals
That’s the ones I used. It is a cross in the National seal book. Iirc there are 3 or 4 numbers that are same Id and od but different construction. That one worked out to the cheapest to obtain.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 6
- 345
-
by Clemsonfor
Sun Sep 12, 2021 6:59 pm
-
- 6
- 420
-
by Ricaroo
Wed Aug 04, 2021 5:23 pm
-
- 1
- 207
-
by Jim Becker
Mon Feb 21, 2022 12:40 am
-
- 16
- 553
-
by MattS
Thu Mar 30, 2023 11:53 am
-
- 3
- 198
-
by Glen
Sun Jan 01, 2023 7:45 pm
Who is online
Users browsing this forum: No registered users and 1 guest