ZTR Opinions and Suggestions

VinceD

501 Club
We are considering purchasing a ZTR (Zero Turn Radius) mower. Does anyone have any opinions, pros - cons, suggestions as to good make and model? This will be for residential use. We do have some pretty steep Ozark hills. Thanks in advance.
 
I have 2 Exmark Lazer Z's, a 52" an a 60" both are 23 hp Kohler air cooled A. To me Exmark is the best mower available and the quality of the cut is what all other manufacters are trying to achive....... ZTR's don't do well with hills , use your judgement and stay safe.....
 
I bought a Cub Cadet Z-Force 44". So far I like it. First one I have ever had. I've only had it for about 1 1/2 months. Only been able to mow with it twice. No rain, no grass growing. It is a residential model, but a step up from the low end model. It has a welded frame and larger drive pumps.

JimT
 
Hi Vince

One thing do not cut wet or dew covered grass on hills. You will find yourself at the bottom in a hurry. If you are cutting across one when you turn around always turn with the front facing up hill when the front gets down hill it takes the traction off the tires and just slids. I guess it depends on how steep the hills are I was cutting a one on four and slid eighty feet down the slope and ended up in a ditch more than once. They are all about the same in that respect I did the same with a quickway $34,000 zero turn which is rated to cut a 45% hill slope with dual ag tires on back.

On the other hand thay can cut a lot fast and do a great job. I was cutting a landfill which was 3/4 miles long and 1\2 mile wide 120 foot of slope and get it done in a day.

Billy
 
Back
Top