Yesterdays tractors website

Allis Chalmers6":3tpajtk9 said:
Kim Pratt shutdown the off topic forum due to a few rotten individuals. We have agreed to try this site out for political discussion. we feel that a site that gets out of hand should have the one or two rotten apples out and not the majority of the good bunch.

I am one of the more liberal I guess of the members, I enjoy a good discussion and I believe in free speech. But with the concept of Free Speech also comes the Responsibility of Good Manners.

This is Dennis's House, and we abide by Dennis's Rules. Those Rules say Civility, Politeness, Respect, and Responsiblitly are the guiding principles one should keep in mind when posting. I like all the other moderators do not like nor will accept the kind of nonesense that usually occurs on Political Discussions that tend to be pro/con and vehement. These ALWAYS degenerate. When the topic gets a tad out hand, IT WILL BE LOCKED. If it is restarted in another Thread -- IT WILL BE LOCKED If it starts again, and the originator, co-instigators will be forwarded to the Site Admin with a very strong recommendation to have the USER DENIED ALL FURTHER POSTING PRIVILEDGES. If it occurs that the poster relogs on as another ident.. then that POSTER will be banned from an ISP base.

This is a Family Site, with family values and a shared interest in a little Red Farm Tractor that has helped to support, feed and grow families. The WWWOT Forum is there for the occassional rant as long as it is in good taste and does not insult, hurt, embarrass or cause any other type of injury to a fellow forum member.

THIS is not a Political Blog site. If the only reason you wish to join is to discuss Politics I would suggest that a Political Blog/Forum Site would be a far better venue.

Now if you are here for Little Red Tractors or even a balanced comparison between our Cubs and say an Allis "G" -- then:

First,
welcome.gif
to the greatest forum on the internet, and to the Cub Family. You will find that all the folks on this forum are kind, helpful and just full of Cub info and knowledge. They also happen to be the finest folks I have ever met :!: :D

The Welcome Wagon is a relatively brief introduction to the information that is currently available on Cub tractors, and answers many of the common questions new members ask right of the bat. Although it is a bit overwhelming :shock: , it has been designed to actually be copied to a Word Processor such as Microsoft Word (which preserves the active links), and saved to your desktop for easy reference at a later date or when you have a bit more time to read all the information contained in the links below. Please do so, enjoy and I hope this will be a useful aid in learning more about your New Cub Tractor :!: :D

Filling out your
icon_mini_profile.gif
Profile is a real help. It just needs to be - State,City, County, a lot less than what is available in your local phone book. Knowing where you are will help in members offering to come help, when you are looking for parts - the area that would be useful to you etc., Also our CubFests, Mini-Fests or a simple KaffeeKlatsch/get together over coffee and a doughnut etc., to help each other benefits. Just a thought :!:

Ok, so here is the spiel
captain.gif
:

I would suggest that you read this thread: New Members and Visitors, Please READ Prior to Posting. There are many great links to informative pages such as the ATIS FAQ's 1 and ATIS FAQ's 2, The Best of H.L. Chauvin who has written very interesting articles on troubleshooting common problems with your Cub. One of the other projects we have been working on and it will be a continuing effort is the The Cub Book of Knowledge. This the the place to go to get all the quick links to some very good articles written by many members of the forum on solving some of the problems we encounter as we repair, maintain and up-grade our Cubs. Keep looking for this to grow.


Also, you might want to visit the Cub Manual Server as there is tons of info on servicing, maintaining and re-building your Cub. In addition to this basic information, there are also a number of other useful tools available on the server. There is the Specialty Services page which has contact info for neat stuff like getting your seats recovered, buying quality Decals, Serial Number tags and a host of other neat items. Also there are the Parts Pages - both Used Parts Suppliers and New Parts Suppliers pages with links to quality dealers. I am always looking for YOUR favourite dealers for New and Used Parts to include here. These pages are intended to complement our Official FarmallCub.com Website Sponsors:I would also recommend that you visit Binder Books and purchase the three most important manuals you can own for Maintenance, Repair and Rebuilding your Cub. These are the Owner's Manual, the GSS-1411 Service Manual and the TC-37F Parts Manual. Although they are available on the Cub Manual Server, it is better if you also have your own paper copy. Binder Books is the only Authorized IH Publication Reprint House and they have the best quality manuals available. Most other's are not of the same quality. Just a personal thought here, the I&T Shop Manuals, although helpful in some areas, really are not sufficient for the job. If you wish though, they are good additional reference works.

IF you really want to get the skinny on all things Cub, might I suggest you get a copy of Ken Updike's Farmall Cub and Cub Cadet's :?: . While you are at it Original Farmall Cub and Cub Cadet is Ken's latest addition to the series. Along with Guy Fay's Letter Series Originality Guide, these are three must have's in anyone's collection.

In addition to the above information, don't forget to check out the various articles that are available to help with your Repair, Restore, Rebuild or just your Maintenance Projects. There are a number of sub pages such as Electrolysis or Rust Zapper's, Maintenance Tips, Jigs and Techniques, Implement and Part Sketches and of course the Paint, Decals & Other Finish Questions which has the Paint Chart and the Paint Committee Decisions links.

Oh, and while the program still lasts.. you might want to check the Announcement: Navistar Free Gas Cap Offer - On-Line Form thread at the top of the Cub Forum and send away for the new style safety cap before that program runs out as well. The program has been extended and no new definite end-date has been announced at this point. It is an extension only and may end rather quickly depending on available stocks. Please do take advantage of this offer and get the new safety caps :idea: :!:

I truly hope that you enjoy your Cub and that you will be a frequent contributor to the forum. Again,
welcome.gif
to the Cub Family
congrats.gif
:D
 
The references Paul_NJ mentioned refer to GRUMPY too many times. :shock: Twerent me. The last thing we need is a BASH board or anything to get our danders up. Too much good info here to get it screwed up by a couple of fools. Kinda scares me when somebody says " we can't fight here so lets meet at someone elses site" Hope that was not the intent. We shall overcome huh :?: Take care. Grump
 
I am new here, but I think that eveyone has done a great good of keeping this site about the little red tractors. I am on other forums were they like to do that kind of stuff and I get tried of it. Thats why I like this site. If you are here to talk about tractor Weclome to a great site.
Thanks to all the great people on his site. :{_}:
Kyle
 
John, I don't think you need to apologize to any group or individuals anywhere! What you said is true and I for one am behind you 110%. Pete
 
John *.?-!.* cub owner":31mebgzm said:

John, very well posted. That was done with good taste. YT mag is a decent site for the most part. I rarely go there anymore cause of the bashing and people that put you down. I quit asking questions over there cause of the responses.

Now this site, that's a different story. I have never seen a better site than this one. Thanks to Dennis, and all of you moderators for making this site such a family like site.
 
Pete1941":1oj01259 said:
John, I don't think you need to apologize to any group or individuals anywhere! What you said is true and I for one am behind you 110%. Pete

John,

I agree with Pete, you have NOTHING to apologize for. I read your posts here and on YT. Absolutely nothing to apologize for.

Bill
 
I want to give Dennis thanks and all the moderators as well. The only problem I saw when one of our moderators made a mistake. (He thought he was wrong, but upon reflection he wasn't)
 
All I can say is, I'm not arguing with a fool. If I would argue, nobody around would know which one of us was the fool. I don't talk politics except sitting here drinking coffee. Thanks moderators for not letting all that stuff on our board. I've got better friends on this board than I have in regular life. I've met some of our brothers/sisters, and hope to meet more.

Merlin
 
Merlin":3rdsi42q said:
All I can say is, I'm not arguing with a fool. If I would argue, nobody around would know which one of us was the fool. I don't talk politics except sitting here drinking coffee. Thanks moderators for not letting all that stuff on our board. I've got better friends on this board than I have in regular life. I've met some of our brothers/sisters, and hope to meet more.

Merlin

Merlin, I would love to have the pleasure of having a cup of coffee with you in the presense of your surroundings.

Us Mods Appreciate yours and all of the members of this board who give thanks for the cleansing of rubble that is not appreciated by MOST who read the true meaning of what this forum is and what it was meant to be. We can all thank Dennis for this great family he has created. {Dennis=God-Father}
 
I love this site the way it is.THE BEST PEOPLE RUN IT!!!THANKS!!! It helps when your part of a big family ya gotta have rules!!!DON"T CHANGE A THING!!!!KETCHAM!!!!
 
Bill E Bob":31o4bstr said:
John *.?-!.* cub owner":31o4bstr said:
Sometimes an unneeded apology can work wonders at soothing feelings.

John,

You are absolutely FIRST CLASS!!!

Ditto!.

Rudi, You did an excellent job too!

Those two posts by John and Rudi are good advertisement of what the people are like on this forum!

Excellent job guys, I'm proud to be a part of this froum.
 
I drive a truck all day, and sometimes you'll hear on the CB radio what happens on some of these runaway forums. It seems that some folks will say anything if they think there won't be consequences for their comments, and truckers are no exception. After doling out abuse and hate, these same loudmouths will be lined up later in the day at a receiver's window--just as quiet and meek as can be. :roll: Needless to say, after 36 years of driving my CB remains off most of the time, unless I see someone I know.

What a treat it is to come "home" to this Forum! What a sad commentary on the human condition that close supervision is needed to keep this forum the great place that it is. Sigh..... :( Having said that, I thank Dennis and the moderators for their diligent efforts.
 
i would like to add some cold water to that spark before it flames up. the guy on the lil red (or yeller) tractor can't do a thing for you. the one you NEED to take this up with is your congressman. they love to talk politics. i love to talk politics, but this is not the place.

there may be one or two on this forum who have voted in more elections than i have, but one thing has been consistant. my choice has been for the lesser of what i saw as two bad choices. no amount of foul language can change that. if you have an opinion about a political candidate the place to voice it is at your polling place, in the ballot box. at long last there could be a candidate i could vote FOR. i could put his name here, but like i said above, THIS IS NOT THE PLACE!
 
Jeff M":pgh8n8f1 said:
I drive a truck all day, and sometimes you'll hear on the CB radio what happens on some of these runaway forums. It seems that some folks will say anything if they think there won't be consequences for their comments, and truckers are no exception. After doling out abuse and hate, these same loudmouths will be lined up later in the day at a receiver's window--just as quiet and meek as can be. :roll: Needless to say, after 36 years of driving my CB remains off most of the time, unless I see someone I know.

What a treat it is to come "home" to this Forum! What a sad commentary on the human condition that close supervision is needed to keep this forum the great place that it is. Sigh..... :( Having said that, I thank Dennis and the moderators for their diligent efforts.

Jeff

You expressed the situation so wisely. And it's not only the abusive and crude language. Being anonamous does strange things to some people. I appreciate this board because there is a real genuineness of good people here. Ask a question on most other boards and you'll get usually a couple good answers, but also people responding who have no idea what they're talking about, or just noise. There was an issue over at ATIS last week, and someone offered this humerous posting to help calm things down. I thought I'd share it here:




How many forum members to change a light bulb?

1 to change the light bulb and to post that the light bulb has been changed

14 to share similar experiences of changing light bulbs and how the
light bulb could have been changed differently

7 to caution about the dangers of changing light bulbs

1 to move it to the Lighting section

2 to argue then move it to the Electricals section

7 to point out spelling/grammar errors in posts about changing light bulbs

5 to flame the spell checkers

3 to correct spelling/grammar flames

6 to argue over whether it's "lightbulb" or "light bulb" ...

... another 6 to condemn those 6 as stupid

3 standards zealots to point out that light bulbs have been
deprecated in the LB 2.1 spec

1 to call upon everybody to ignore this deprecation

2 industry professionals to inform the group that the proper term is "lamp"

15 know-it-alls who claim they were in the industry, and that "light
bulb" is perfectly correct

19 to post that this forum is not about light bulbs and to please
take this discussion to a lightbulb forum

11 to defend the posting to this forum saying that we all use light
bulbs and therefore the posts are relevant to this forum

36 to debate which method of changing light bulbs is superior, where
to buy the best light bulbs, what brand of light bulbs work best for
this technique and what brands are faulty

7 to post URL's where one can see examples of different light bulbs

4 to post that the URL's were posted incorrectly and then post the
corrected URL's

3 to post about links they found from the URL's that are relevant to
this group which makes light bulbs relevant to this group

13 to link all posts to date, quote them in their entirety including
all headers and signatures, and add "Me too"

5 to post to the group that they will no longer post because they
cannot handle the light bulb controversy

4 to say "didn't we go through this already a short time ago?"

13 to say "do a Google search on light bulbs before posting questions
about light bulbs"

1 forum lurker to respond to the original post 6 months from now and
start it all over again
 
Back
Top