WTB grader blade

[dreece]

I am looking for a grader/leveling blade close to western Ks. Thanks

 

[Cubfriend]

F-Cub or Loboy?

 

[dreece]

F-Cub or Loboy?

Sorry I should have been a little better with my description. F Cub

 

[Cubfriend]

I’m in Grand Island, Nebraska. Probably too far for you.

 

[dreece]

I’m in Grand Island, Nebraska. Probably too far for you.

Grand Island is really reasonable after everything else I have found!! All of the blades i have found are at least 10+ hours away and we'll over $500. I can drive to Grand island and home in a about 11 hours, so that is reasonable.

 

[Cubfriend]

I’ll see if I can get a picture of a blade for you. Do you need a particular one? There are three different models.

 

[dreece]

I’ll see if I can get a picture of a blade for you. Do you need a particular one? There are three different models.

You must be a night owl like me! I didn't know there was three different ones. I thought they were all the 54A. I would like a mid mount for better control. I don't plan on moving mutch snow, just maintaining my driveway and a friend's. Thanks

 

[Cubfriend]

You must be a night owl like me! I didn't know there was three different ones. I thought they were all the 54A. I would like a mid mount for better control. I don't plan on moving mutch snow, just maintaining my driveway and a friend's. Thanks

OK, so you don’t need the front mount brackets?

 

[dreece]

OK, so you don’t need the front mount brackets?

Nope no front mount brackets

 

[Cubfriend]

Nope no front mount brackets

10-4

 

[Peter Person]

Does your Cub have a Fast Hitch or just a Drawbar? To mid-mount you need a Substitute Drawbar.
No Fast Hitch: https://www.tmtractor.com/tm-tractor/gdr/subdrbar2_001.htm

Fast Hitch: https://www.tmtractor.com/tm-tractor/gdr/subdrbar1_001.htm

 

[Board shortener Tom]

This one came up on Craigslist but it's not close to me.

Farmall Cub Snow Plow Blade - farm & garden - by owner - sale - craigslist

This is a 54" snow plow blade for a Farmall / International Cub tractor.

jxn.craigslist.org

 

[tmays]

Does your Cub have a Fast Hitch or just a Drawbar? To mid-mount you need a Substitute Drawbar.
No Fast Hitch: https://www.tmtractor.com/tm-tractor/gdr/subdrbar2_001.htm

Fast Hitch: https://www.tmtractor.com/tm-tractor/gdr/subdrbar1_001.htm

Don’t need substitute drawbar on cub without fast hitch if you have a drawbar.

 

[Barnyard]

Photo courtesy of TM Tractor Parts

 

[Peter Person]

Don’t need substitute drawbar on cub without fast hitch if you have a drawbar.

I thought that was the case, but since I have a Fast-Hitch, I'm not familiar enough with the non-FH setups, so I went to TM Tractor Implement Hookup photos where they show the substitute drawbar.
Thanks,
Peter

 

[Ky Cub]

I am looking for a grader/leveling blade close to western Ks. Thanks

Cubfriend will fix you up, honest guy.

 

[dgrapes59]

Cubfriend will fix you up, honest guy.

And if you go to pick it up, you might just get "schooled"

 

[Barnyard]

And if you go to pick it up, you might just get "schooled"

Good one David. I bet most members of the forum won't understand that.

 

[Don McCombs]

I do.

 

[staninlowerAL]

I do.

Me too. I'm 82 and that was a common saying back in the day. Stan