woodworks

SONNY

501 Club
Timber Tuff Band Saw Mill


Timber Tuff Log Peeler on a MS 250 Sthil


Grizzly Band Saw


Big Log


Fresh Cut Lumber


This the operation, so far.---Have some chainsaws and the chainsaw mill (oops!--forgot to photo him!) Also forgot the planer and the jointer!
have quite a bit of lumber cut and a lot more to do,-- little at a time when weather permits me being outside .
Also have the old log splitter about re-built and ready to go. more as it comes about! thanks ; sonny
 
Sonny:

Are you going into the commercial lumber business?

In this part of the Ozarks, with in 10 mile radius, there are at least 3 commercial lumber business that cut and mill hard lumber. The 4th, a huge processer, that processes red cedar.
 
I would LOVE to get some red cedar to cut!----my venture is mostly for me and a couple older guys who dabble in wood to keep themselves active.--I will donate them some lumber to so what they can do with it!
I cant justify taking my logs to a commercial sawer . None within 50 miles of us here.--the amount I can get here will more than pay for the equipment.
Next thing is to design a small low tech. kiln to dry some of the lumber! thanks; sonny
 
Aromatic Eastern Red Cedar is a weed tree in much of the Midwest. There are ads in the local paper offering to buy cedar, so much per cord, cut to size, clean. Frequently see locals with a truck load heading to one of the processers. Local tec school student harvested cedar off the acreage to earn some extra money. A young neighbor did the same. All that is required is a chain saw and something to haul the cut timber. Plus a lot of hard work.

Local turkey farmer set up his own chipper. He uses the cedar chips for turkey bedding.

The large commercial firm cuts the cedar into planking for closets and chests, tongue and groove, etc.. Ships a huge quantity to the orient.
 
Heck I can get a few logs of what ever, I would be more than happy to go 50/50 or just pay out right for some milled lumber. There was a guy here in Gibson area who milled power poles into 6x6's for sheds and all kinds of other stuff.
 
Jason!!! Hi!--and were ya been! LOL!----What size logs do you have access to?---I been doing a few maple, wild cherry, and had a couple small mulberry(nice yellow wood), 1 old walnut log about a foot diameter, 3 catalpa logs 5' or so.---a couple of half moon shaped wild cherry logs made some interesting boards, just need ideas on what to make with them!
On the mill I can go as short as 3'6" and max length on it is 9'2". ---20" diameter, BUT that is where the chainsaw mill comes into use! there is NO length limit , and the big logs can be brought down to the 20" mark with it then finish off with the band mill!
I have cut 16" long stuff on the chainsaw mill!!!----I wanted to set up a flexible operation so this is what I ended up with so far!
I am trying to design a mini log carriage for the Grizzly to hold short logs on it and be able to advance the log evenly just like on the Bel-saw M-14 circular saw that I used to have.

Next thing on the equipment list would be to make a small, low cost ,low tech drying kiln to help get the lumber usable a bit quicker, ( I have trouble waiting!!!). If you can come up with something in the line of ideas for kilns, keep us in mind! thanks; sonny
 
Sonny,
I can get some Ash and Elm mostly, I just have to talk to my tree trimmer in town here. They would be around 6' long. I may have some aromic red cedar trees up in Pontiac I could get also. In a few years I will have some Walnut off the farm. I would want them milled with in 30 day of being felled. I will ask Tom what he does with the trunks. But mostly ash is what I would get. Elm is also kinda pretty when finished down. I would love to find a White Oak tree and get it cut up and dried. Maybe Quarter Sawn, Pear Wood is also an interesting look along with Hedge Wood. I will keep you posted.

As for a kiln, would a small green house work with poly panels? Would have to put a small exhaust fan along with a heavy duty dehumidifier in it.

I also know of a guy would built one and put a window air conditioner in one end and a furnace venting into the other end and they work against each other and it works pretty good. I have a bunch of Air dried Cherry from Southern Illinois that has be ok. Just gotta keep it spaced and covered for a while.

Good Luck
 


Many, many, many years ago I made a bunch of these!----They are 3/4" thick links and with hooks, they are a little over 4 feet long. thanks; sonny
 
Back
Top