Woods 59

[Ioscocub]

Gentleman, I guess I’m confused. I thought that putting my woods 59 mower on my recently acquired 57 lowboy was as simple as a different mule drive. It currently is on my 56 F-Cub. Is there more to it than that?

 

[Bill Hudson]

Different mounting brackets/hardware is needed, as well. Others will correct me if I'm in error.

 

[staninlowerAL]

I would try to obtain an Owners Manual for the WOODS model that you have. It should give you the mounting and adjustment instructions. BTW, welcome to the forum. Stan

 

[Ioscocub]

I would try to obtain an Owners Manual for the WOODS model that you have. It should give you the mounting and adjustment instructions. BTW, welcome to the forum. Stan

I have one woods model 59C-2. It only shows that info for a F-Cub.perhaps someone could share the woods model number for a lowboy and I will try source one.

 

[tst]

deck is the same and drive pulley, rest is different, if you have a fast hitch that changes parts also

 

[Ioscocub]

I would

I would try to obtain an Owners Manual for the WOODS model that you have. It should give you the mounting and adjustment instructions. BTW, welcome to the forum. Stan

deck is the same and drive pulley, rest is different, if you have a fast hitch that changes parts also

I’ll be removing the fast hitch
try to obtain an Owners Manual for the WOODS model that you have. It should give you the mounting and adjustment instructions. BTW, welcome to the forum. Stan

I have one woods model

 

[Don McCombs]

I think your model number is 59CL-3.

I

Thread 'Woods 59 on a LO-BOY ?'

Jul 21, 2022

Does anyone know if a Woods 59 underbelly mower that came off a 59 Cub will fit on a 1963 Cub lo boy? The parts all appear to be the same but I dont want to invest in a mower that will not fit. I am new to this and any help will be appreciated.

• isaacstractor
• Replies: 8
• Forum: Farmall Cub

 

[B. White]

I have a copy of 59LB-1 Woods emailed me this week which looks updated compared to anything I found online. PDF is too large to attach using the attach files button below. Revision date is 7/20/2007. Msg me with email address and I will send it, if it helps.

 

[Don McCombs]

I believe that the Woods 59LB-1 is set up for the number series LoBoys. 154, 185 & 184.

 

[B. White]

I'm not confident of anything on mine at this point, other than the blade part number. Mine is a 68 and the frame setup looks closer than any other manuals I can find, but not sure if a dealer or individual did some parts swapping to make it work. I spent a lot of time this week reading stuff posted over the last 20 years and called Woods, but will still be nervous getting the right belt when needed.

 

[offrink]

I'm not confident of anything on mine at this point, other than the blade part number. Mine is a 68 and the frame setup looks closer than any other manuals I can find, but not sure if a dealer or individual did some parts swapping to make it work. I spent a lot of time this week reading stuff posted over the last 20 years and called Woods, but will still be nervous getting the right belt when needed.

View attachment 75559

I'm not confident of anything on mine at this point, other than the blade part number. Mine is a 68 and the frame setup looks closer than any other manuals I can find, but not sure if a dealer or individual did some parts swapping to make it work. I spent a lot of time this week reading stuff posted over the last 20 years and called Woods, but will still be nervous getting the right belt when needed.

View attachment 75559

Run a string in the configuration you want (I use paracord) and then make a mark when you get back to the starting point and measure that. I can’t remember what the correct amount but I think if you have certain belts you need to add 2-3” for the correct number.

 

[john2189]

Take it off now and measure it.