While hooking up the trailer this morning

cowboy

501 Club
I was going to haul a car to the scrap yard today. I hear this thud not loud just not normal. I look out the drive :shock: I see this at the end of my drive way.

IMG_0072.JPG


I don't rember running but my dad says I was. I bent down to look in the passenger window and ask if he was hurt. He said "no I am upside down" :!: luckily he wasn't hurt.

IMG_0075.JPG


He was not even doing the speed limit. But he got into the slush on the side of the road and it spun him out. And when the back tire hit the bottom of the ditch it flipped the truck.

IMG_0074.JPG



That Toyota truck is pretty tough both doors would open and close even after they flipped it back over.

Dave the guy driving the truck is a really nice guy. Dad and I stayed out talking to him and giving what help we could until he left in the tow truck. I decided it was too slippery out to go the scrap yard today guess I will just split wood.

Billy
 
Billy:
It looks like you could have busted your butt. To look at the road its was a little stick. Glad everyone was safe. I would have stayed home also.
Jeff
 
Podge. He was ok not even a cut. His shoulder was sore though.

Jeff My big problem with pulling the trailer is that I don't have the brake wiring setup yet. The guy we bought it from just used a four prong trailer light plug with the brakes disconnected.

Me too Kyle :!:

Bill my big truck weighs a Lot more I don't think I would have had a problem. Plus I have a Lot of experience driving when its slippery whether its mud or snow. I hauled 6.7 tons of stone home yesterday. The first load the guy got carried away and loaded me with 3150lbs in the truck bed. But the big ford handled it no problem. I am going to wish I had coal tommrow not supposed to get warmer than 6 deg F.

Billy
 
It does not take much to flip a SUV or truck.Once they start to go your done.I saw a woman flip a Jeep Chrokee doing less than 30 mph.The kid in the back wanted to do it again!!!Boy was she shakin.Be carefull!!!Kevin glad he wasn't hurt!!! :shock: :shock:
 
Kevin funny you should say that. It made me rember when my brother rolled my snowmobile he was only doing like five mph. Doing a donut on the ice hit the snow on the side and broke another $80 windshield that I had just put on the day before :!: If the field was frozen Dave might not have flipped his truck. You could see where the tire dug in eight inches just before it rolled.


Bill no doubt about that :!: Dave ask If he owed me anything for all the help I gave him. I said no "If I don't help you who's going to help me." I want to live in a world where people help each other because it it make everyone feel good. Not because of what you can gain financially from it. The only way that I can think of to do that is by example :wink:

Billy
 
Cowboy":32u6j486 said:
I want to live in a world where people help each other because it it make everyone feel good. Not because of what you can gain financially from it. The only way that I can think of to do that is by example :wink: Billy
Billy, that is a good example to live by. You did right by your actions. That shows you were brought up well.

It seems as if everyone on this forum lives by that credo. The "do unto others" thing seems to be upheld here a lot. Just look at the teamwork that goes into Cub Express and the great camaraderie at any CubFest where this guy shows that guy how to do this or that. “People helping people”, that is a great thing. It’s too bad it is not practiced more often around the world. That is what makes this forum great. Terrific, helpful folks who just can’t wait to jump in and help.
 
Bill no doubt about that :!: Dave ask If he owed me anything for all the help I gave him. I said no "If I don't help you who's going to help me." I want to live in a world where people help each other because it it make everyone feel good. Not because of what you can gain financially from it. The only way that I can think of to do that is by example :wink: Billy[/quote said:
It sure must make your Dad happy to her you say that. Looks as if you are a chip off the old block.
 
Thank ya kindly Barnyard :!: It is truly amazing how many Peaple Of Good Will Have gathered around here :D


Thanks once again Bill. Dad said the best way to pay him back is next time he sees someone that needs help Help Them :!: And Dave said he would 8)

Thanks Jim. Have yourself a great day.

Billy
 
Cowboy-

He was too distracted looking at your beautiful smoothed out pile of stones that he just drove off the road. :lol:
 
Cowboy":3rgbz57f said:
Jeff My big problem with pulling the trailer is that I don't have the brake wiring setup yet. The guy we bought it from just used a four prong trailer light plug with the brakes disconnected.
Billy
Bill I'm sure you know what you are doing and wouldnt want to step on any toes here, but from one farmall comrad to another, the best money you will ever spend is going down and having your brakes set up on your trailer. I drive trailers everyday, some light, some very heavy. You would be surprised at how easy it is to lose traction if there is a little sand or moisture in the road. Some time ago I was driving through a neighborhood with one of my trailers and a small child on a bike darted across the road. I was just able to stop. The trailer brakes probably saved the childs life. Also, like I normally do, I was going well under the speed limit. Trailers take more to stop than most people realize. Just thought I would comment. I see a lot of people talk about needing to get their trailer brakes working. Hope I didnt cross the line here with you. :) :)
 
Geibes :thumbsup:


Ron I am with you :!: You are not stepping on my toes at all. Its good to remind everyone how important trailer breaks are. I am waiting for warmer weather to start working on the breaks. I need to get a big soldering iron too. I want to have all wiring soldered together. I have had too many problems with crimp on connectors.

John do you still recommend the prodigy brake controller :?: There is a vector controller in the truck now but I don't think its working.

Thanks

Billy
 
Cowboy":ao0h57zu said:
John do you still recommend the prodigy brake controller :?: There is a vector controller in the truck now but I don't think its working.

Thanks

Billy
YUP, I highly recommend it. I have had one in the Ranger for nearly 5 years, and one in the F-150 for over a year, and very pleased with them. The life time warranty is nothing to sneeze at either.
 
Back
Top