What's your favorite?

Airew

Member
To all the owners of multiple tractors, what is your favorite? I know I have multiple answers for what I'm "doing" with the tractor, this is just for fun. For me, doing light chores such as pulling a yard roller or dethatcher My 52 Farmall Cub is my favorite. I love how quiet these are compared to my Cub Cadets. I like it better than my 184, although the 184 rides a bit better.
 
Just red ones?
Nope, anything goes. For example, I have 2 tricycle gear tractors, a 46 John Deere A, and a 54 JI Case SC. I totally would rather be on the Case vs the Deere. For a tractor ride down the road, my 1959 Massey Ferguson 50 is the best road tractor, it rides so smooth where the tricycle gear tractors have front wheel wobble and the International 184 and the Cub are too slow.

For mowing a lot and fast, I love my Ferris ISX 800, it's so smooth. I really enjoy riding around on my old Cub Cadet 129 and 1250 too. Honestly, I like them all :).
 
I like my Farmall Super C best.
I have heard great things about the C, I was researching "Super C vs H" and a lot of folks liked the C the best, claimed it was really maneuverable and fun to drive. One the H was a little better in the field. One day I hope to have a Super C or a C.
 
Ah, yes, the Ferris mower. I have a Simplicity zero turn with a 61-inch mower deck with a 25 hp Kohler. Best thing about this mower is the independent suspension with struts - same as the Ferris because Ferris made it. I believe Stihl now took them over. No other manufacturer has this suspension, which is far better than any spring-loaded seat on other brands, because the entire machine gets the smooth ride and that makes the mower deck do a good job without the bouncing of other brands.

For a ride in the country, my '54 Ford NAA is the smoothest ride. With the underslung exhaust, no fumes in the face. It was my first restoration on a tractor and now has 160 hours since the restoration in 1995. The '54 model is virtually the same as the celebrated '53 Jubilee with the front badging the only give-away. Don't work it anymore.

My '56 Allis Chalmers IB (industrial B) kicks tail on the snow with the rather large and heavy 6-foot, front snow plow blade. Electronic ignition and new everything except original rear turf tires. Tire chains and rear wheel weights push big snows. No fun driving it down the road because of tire chains and exhaust fumes in the face. But, it can sure do some pulling.

My '48 Cub is used mainly for getting wood with the small trailer. It has no options other than a PTO, which I haven't used since the dyno test in 2009. At Rick Prentice's Cubfest, it spun an impressive 2650 rpms. It's not quiet, when I lean on it, but that part of the fun with the tall open, straight pipe, which keeps exhaust fumes above nose level for rides. It was every nut and bolt restoration in 2001 and has had no issues since then including leaks of any kind. Guessing it has approximately 60 hours on it.

For real work, the '48 Ford 8n is an ugly beast but does the dirty work of food plots.
 
Ford tractors is my current favorite, but they're all good in one way or another, and yet, bad in one way or another.
 
Ah, yes, the Ferris mower. I have a Simplicity zero turn with a 61-inch mower deck with a 25 hp Kohler. Best thing about this mower is the independent suspension with struts - same as the Ferris because Ferris made it. I believe Stihl now took them over. No other manufacturer has this suspension, which is far better than any spring-loaded seat on other brands, because the entire machine gets the smooth ride and that makes the mower deck do a good job without the bouncing of other brands.

For a ride in the country, my '54 Ford NAA is the smoothest ride. With the underslung exhaust, no fumes in the face. It was my first restoration on a tractor and now has 160 hours since the restoration in 1995. The '54 model is virtually the same as the celebrated '53 Jubilee with the front badging the only give-away. Don't work it anymore.

My '56 Allis Chalmers IB (industrial B) kicks tail on the snow with the rather large and heavy 6-foot, front snow plow blade. Electronic ignition and new everything except original rear turf tires. Tire chains and rear wheel weights push big snows. No fun driving it down the road because of tire chains and exhaust fumes in the face. But, it can sure do some pulling.

My '48 Cub is used mainly for getting wood with the small trailer. It has no options other than a PTO, which I haven't used since the dyno test in 2009. At Rick Prentice's Cubfest, it spun an impressive 2650 rpms. It's not quiet, when I lean on it, but that part of the fun with the tall open, straight pipe, which keeps exhaust fumes above nose level for rides. It was every nut and bolt restoration in 2001 and has had no issues since then including leaks of any kind. Guessing it has approximately 60 hours on it.

For real work, the '48 Ford 8n is an ugly beast but does the dirty work of food plots.
My Massey 50 has the underslung exhaust as well, it is very nice not having those fumes in your face.
 
I have accumulated quite a few tractors in my collection. My Dad bought a Farmall 300 and an Internationl 350 Diesel Utility, both new, when he bought the ranch in 1956. I still have the Farmall 300 so I would have to label it my favorite. My sister still has the 350 Diesel Utility too, both very cool tractors to have.
 
Last edited:
I have accumulated quite a few tractors in my collection. My Dad bought a Farmall 300 and an Internationl 350 Diesel Utility, both new, when he bought the ranch in 1956. I still have the Farmall 300 so I would have to label in my favorite. My sister still has the 350 Diesel Utility too, both very cool tractors to have.
Great story
 
Here is my ranking:
1. Super C- best and easiest to drive, nimble and one of the most interesting with the 3 dimensional fast hitch
2. Ferguson TO35- most handy around the house for trailers and boom lifting, easy on and off and has hi-lo transmission and can still work a 5ft brush hog.
3. JD 3020- biggest and most powerful used for 40 acres of brush hogging. Most "modern" with all the "complexity" which has been fun and frustrating to learn. Nice riding, comfortable and pulls a 6 ft woods trailing brush hog beast.
4. Cub- best for snow plowing and cart pulling out of all of them.
5. IH 504 Hi-Clear- Has a 2000 loader and has power to be back up brush hogging...power steering is nice too.
6. JD B- Super cool and historically rich to have but the hand clutch and the non live hydraulics is awkward to maneuver in close quarters.
7. 8N- Neat to have and use it to move dirt with a rear scoop and finish mow. Good for a big yard without much maneuvering needed because of the non live hydraulics.

Love 'em all and if has been a lot of fun learning and continuing to learn about them through lots of fixin'.
 
Like others... it depends. For blowing snow and mowing, the Husqvarna. I have a cadet for which I have a snowblower and mower deck but the Husqvarna has a snowcab and 4 inch larger deck. The Cadet has a mounted sprayer. To move a cart? Which one can I get without having to move anything? The cub has a Mott mower which hasn't been off in a while. I use it to mow the outback, cut asparagus fern and push a trailer in and out. It has a Barnyard front hitch and works well for this. Can't think of everything right now but use it often with the trailer around the place. The International 404 is used seldom but is nice when I want to move something like a log or to put lumber in the upper level of the barn, originally a hay mow. I also use it to move cutoffs from woodshop to the burn pile and planer chips, sawdust and sanding dust to the to the outback and spread it by tilting thhe bucket while moving forward.
Vern
 
I like my 47 Krusty a little more than my 49 Ollie...I had to rebuild the 47...and tires other stuff....Got a H...It handles big jobs.....Like motorcycles...Can't have just ONE!!!!!!!!!!!!!:p:p:p:p:p:p:p:p:p
 
1 --- 2444 and c-80 mower
2 -- AC 440 ( have 2 with consec serial #'s)
3 -- 140 and 42 mower
4 -- cub with the 3-pt hitch.
5 -- actually should be #1 but I love the neighbors 806 diesel. I use it once in a while on my batwing mower.
6--504 and KK 72 tiller
7 -- 560 that I am still working on,--- really need it finished so I can use it again. Abbott 3 pt hitch goes on it off the other 560
I have more but these are the main ones.
 
Back
Top