What izzit?

Barnyard

Moderator
Staff member
When ever Rosie and I go out for our little rides something usually follows us home. I like it when that thing is red (or rust colored) and has four tires. But occasionally some of those things are smaller and we have no idea what they are. Such as this little dude.

107_3895.JPG


107_3897.JPG


It is about 15 inches long and was made by the Champion DeArment Tool Company which later changed it's name to Channellock Inc. I need to get a bigger magnifying glass as it appears to have more writing on it.

Any ideas?
 
The compound action leads me to believe that it is for hardened, high tensile, wire. The design puts tremendous additional cutting pressure on the jaws.
 
I told Bill this afternoon that I had watched my dad use a tool like this to perform dental work on boar hogs. (they don't like it very much)
 
Bigdog":1v7skqvn said:
I told Bill this afternoon that I had watched my dad use a tool like this to perform dental work on boar hogs. (they don't like it very much)
I suspect the hog would be a little excited to say the least. I was thinking about my wisdom (or lack of wisdom) teeth was Bigdog told me about it.
 
Bob in CT":3pukt77u said:
Here is my favorite old tool web site. Looks like they need a picture of your tool to add to their collection. http://home.comcast.net/~alloy-artifacts/champion-dearment-tool.html
Bob, I found that site earlier today and thought the same thing. That is how I found the Channellock connection. I plan to contact them Monday with some pix and see if it is the Hoof shears, although there is no doubt a farmer would use it on teeth if he had it handy.
 
Darrell, after I found Champions website I looked everywhere on the tool. It only said "Pat Apd For". I reckon they put this batch out before a number was issued. According to their website, DeArment didn't add Champion to it's name until 1927. The hoof shears patent was issued in 1909. From what I can figure this had to be made after 1927. If a patent # hadn't been issued for this tool in 1927 I would think it isn't a hoof shear.
 
Bill,

It is like no hoof trimmers I have ever seen. Most hoof trimmers (for large animals) have the cutting surface 90 degrees to the plane of the handles. As others have stated, wire cutters are the probable use.

Bill
 
thomas B Peterson":37r6ow6z said:
Hi Barnyard: Check with Channelock in Meadville, Pa they might have the answer. Thomas Peterson
I checked with them Saturday. I am hoping for a response when they get back to work today.
 
:? :?
Bill,
If it's a hoof trimmer it's for cloven hoofs. Pigs, goats, sheep. Wouldn't work on a horse or mule.
 
Back
Top