Jeff Silvey
501 Club
We found this in 2002 in my Grandfather's stuff. He would tear down house's to build filling station. Gramdpaw was 105 when he passed. We need help on what is it.
Thanks
Thanks
Jim, I had this up once but can't get it to reload. I believe what you want is page 278 or at least I have a 278 scrawled on my paper. It is the tublar door hanger that you want. It may be that by 1919 they had gone to a stamped end instead of a cast one. I found in my wanderings somewhere that they were granted several patents from 1909 thru 1912 for door hangers but there was no real information. There is also shown a smaller door hanger using a small tube a couple of pages later. Look at the right end of the drawing at the end cap? I can only guess where the part I have came from but it may have been removed from the barn in 1943 when dad put on an addition and would have eliminated any way of using a common sliding door. (A bifold was installed). I have used a door with this system somewhere and it is not so good. The slotted tubes do not remain aligned all that well. It may be that the cow doors on dad's barn had them. I also remember the slotted tubes quite well including the notch used for alignment, something that cannot be seen just from using the door. I may have played with the tubes as a lad but in 1943 the price of scrap iron would have been high so why weren't they scrapped before I was old enough to remember them? The barn was torn down in 2002. I wish my memory was better. Google patent 902,221. There are drawings but no pictures and nothing about the end cap. It does show the bearing carriers but not well. Most of the comments so far concern the center image with no explanation of what I am calling the bearing carriers/door attach. Me? I'm getting ready to take bets. VernJim Becker":2uqseljd said:I paged through the entire 1919 Star Line catalog (Hunt, Helm, Ferris) and didn't see a match or anything really close.
http://www.archive.org/details/starlinecomprisi00hunt