welder

Todd,

You are right about the quality of the Miller machine and justifing the cost, I have a Miller 140 in my Auto Class and it is great machine. Have you taken a welding course? Many Career centers or local community Colleges offer Adult Education courses such as these. I teach an Adult Ed Welding course at Lenawee Tech Center and it is a wonderful way to get started and try different processes and machines without actually buying a machine first. I have several students each session that use this approach before buying a machine.

I personnally own a Marquette 130 115 volt machine, it was reasonably priced at the time and I got what I paid for. It works good, but I have had to remake the wire feed mountings as they were made of plastic and did not hold up very well. Unless you are handy and know what you are buying/looking for, some of these lower price machines or auction machines are more headaches than they are worth.

Hope this helps

Mark
 
What are you going to use it for, do you already have a stick welder? I just bought a Hobart wire feed and love it however, mig welding requires clean material. If you plan on using it for repair work on rusty dirty metal you would be better off with stick.
 
I plan on using for light repair work to rusty metal (that is wire brushed ) and welding nuts to snapped head bolts, light fabricating on trailers, etc small work where the metal is as clean as I can get with a wire wheel.
I do not own any welders at this time
 
ToddW":qhglshka said:
I tried the Miller 140 this morning at Airgas, It has the auto-adjust wire feed and amps. very nice. It also had the tank with co2 and argon mix.
THe whole set up with cart and tank and mask will be around 1000 bucks.
Well worth the unit, still kicking around how much I can justify that kind of money for occasional welding.

The Miller 140 Auto Set just came off a company wide sale that ended July 30, it was selling for 675 with choice of a cart or 50 dollar rebate , the Miller 140 non Auto Set was selling for 625 and no promotions.

I was told that when you buy a Miller you get a Real welder backed by a REAL welder manufacturer and parts and service will never be an issue with a Miller , the Chinese made brands and the Home Depot Lincolns will most likely be a discontinued model with limited parts and service,,,,,,,,, anyway thats the sales pitch I got and it worked cause I am getting the Miller 140 Auto Set......
 
I have a Miller 185 that I have had for close to 15 years now. The only thing I have had to do is clean the feed rollers and change the tip a few times. But Miller Hobart and Lincoln are all good welders. Most welders can handle different size wire. Mine can use .025 .030 or .035 I believe. I have been using .030 since I have had it. Thats a little big for sheet metal and exhaust pipes but works well for everything else I do. I used a stick welder for the first time in 10 years or so last weekend It took a while to get the hang of striking a ark and feeding the rod in again. But now I would like to get one for the versatility of using different rods and being able to burn into dirty an painted metal and being able to use it outside when its windy.

You might want to look a cragis list and see if you can find a good used one. Just make sure you try it out before you get it.

Billy
 
Ok update,
I found out about a guy here locally who has the Miller Cricket that he is thinking about selling me.
I know they are not high powered like some of the ones you guys have here, but it is a Miller, and from what i've read can weld up to 3/16".
That should be enough power for me to do small repairs, and let me weld nuts onto broke head bolts, right? (a flathead 239 v8 issue I currently have)
Plus I think they can have gas added to the unit.
He wants 250 for it, but I plan on offering a little less.
This might be the perfect size unit for a newbie like me.
HAVE ANYOF YOU EVER USED ONE OF THESE? I think they were the model before the 130 came out.
Thanks!!
 
Todd,

If my memory is right, I believe there were two models a 70 amp and a 90amp both are more than likely 20% duty cycle. I would walk on the 70 amp as the most it would weld is 11 gauge or less sheetmetal.

The 90 amp unit would be more practical and would probably weld 3/16" depending on condition and without a gas bottle and regulator it is worth between 150-200 dollars.

Remember that this machine is for light duty work and will not put out enough heat for your flathead headbolt job. For that maybe you could you could pickup an old Lincoln AC doghouse stick welder for the heavier jobs, these are available from around 150 dollars.

Mark
 
The Fab shop where my Dad retired from uses exclusively Miller machines. I don't know the model numbers, but they attach to a long retractable arm, small blue box, and about a 2 ft. dia. spool of wire that's located on the wall. They're very mobile, as they build and work on such a variety of things. Product support is vital, as Dad said down time is costly. If something breaks, there's a rep. there usually within 30 minutes.
With that said, sometimes a sales pitch isn't always accurate.

normal_MadeUSA2.JPG
 
I made the decision (finally), and bought a Hobart 125 Handler (not the EZ) Mig with upgrade to gas kit.
Been practicing welding nuts onto studs in my vise, very sweet welder. They gave me flux core wire .030" so I am not hooking up gas conversion until I use the flux core. My garage has dedicated breakers for specific outlets, I can see that is a must! It draws some good power, very sweet
 
Back
Top