John Niekamp
501 Club
Hi guys,
As some of you might remember that a few weeks ago I purchased a 1926 Model T Ford Tudor sedan off of eBay. Well I have been doing some small things to it while the engine is in the machine shop getting new babbitt poured line machined, cylindered bored out, you know all those things in order to overhaul it?
With all the old antique engines I have seen and worked on over the years, this has to be one of the weirdest looking carburetor setups I have seen. It's called a Kingston Regenerator or "vaporizer" I have not really studied the fundamentals of it yet, but once I get into it I am sure I will understand it more, honestly speaking right now I am sorta scratching me head. Henry Ford used a couple other types and styles of carburetors over the years of production of the Model T, but none that I know of is like this one AND leave it to me to end up with the goofy looking one and probably the most temperamental of them all.
I am pretty sure that the lever just above the holely looking thing-ma-bob (air intake) is the choke and the lever on the top of it all is the throttle control. I "think" there is a thin tin plate that is between the intake and exhaust ports that heats the fuel vapor before it goes in the intake to burn, but that is only an assumption.
Anyhow I am getting ready to post a question about it on the Model T forum that I belong to and maybe learn some things about it before I start tearing it apart, but I thought some of you might like to see it too. sure glad my Cubs don't have something to complicated looking.
John Niekamp
As some of you might remember that a few weeks ago I purchased a 1926 Model T Ford Tudor sedan off of eBay. Well I have been doing some small things to it while the engine is in the machine shop getting new babbitt poured line machined, cylindered bored out, you know all those things in order to overhaul it?
With all the old antique engines I have seen and worked on over the years, this has to be one of the weirdest looking carburetor setups I have seen. It's called a Kingston Regenerator or "vaporizer" I have not really studied the fundamentals of it yet, but once I get into it I am sure I will understand it more, honestly speaking right now I am sorta scratching me head. Henry Ford used a couple other types and styles of carburetors over the years of production of the Model T, but none that I know of is like this one AND leave it to me to end up with the goofy looking one and probably the most temperamental of them all.
I am pretty sure that the lever just above the holely looking thing-ma-bob (air intake) is the choke and the lever on the top of it all is the throttle control. I "think" there is a thin tin plate that is between the intake and exhaust ports that heats the fuel vapor before it goes in the intake to burn, but that is only an assumption.
Anyhow I am getting ready to post a question about it on the Model T forum that I belong to and maybe learn some things about it before I start tearing it apart, but I thought some of you might like to see it too. sure glad my Cubs don't have something to complicated looking.
John Niekamp