Weird looking vintage Ford Carburetor

John Niekamp

501 Club
Hi guys,

As some of you might remember that a few weeks ago I purchased a 1926 Model T Ford Tudor sedan off of eBay. Well I have been doing some small things to it while the engine is in the machine shop getting new babbitt poured line machined, cylindered bored out, you know all those things in order to overhaul it?

With all the old antique engines I have seen and worked on over the years, this has to be one of the weirdest looking carburetor setups I have seen. It's called a Kingston Regenerator or "vaporizer" I have not really studied the fundamentals of it yet, but once I get into it I am sure I will understand it more, honestly speaking right now I am sorta scratching me head. Henry Ford used a couple other types and styles of carburetors over the years of production of the Model T, but none that I know of is like this one AND leave it to me to end up with the goofy looking one and probably the most temperamental of them all.

I am pretty sure that the lever just above the holely looking thing-ma-bob (air intake) is the choke and the lever on the top of it all is the throttle control. I "think" there is a thin tin plate that is between the intake and exhaust ports that heats the fuel vapor before it goes in the intake to burn, but that is only an assumption.

Anyhow I am getting ready to post a question about it on the Model T forum that I belong to and maybe learn some things about it before I start tearing it apart, but I thought some of you might like to see it too. sure glad my Cubs don't have something to complicated looking.

John Niekamp


Vaporizer1.jpg


Vaporizer2.jpg
 
In 1926 ford used Kingston model L4, Holley model NH, and the Holley Vaporizer. The Holley Vaporizer became standard in late 1926. The Kingston Regenerator may have been used in late 1926. It was used in 1927, although not as common as the Holley Vaporizer.
 
Back
Top