Water pumps for pond or stream

Farmallsodbuster

Active member
I have an off grid place with a nice stream. I purchased a harbor freight gasoline powered water pump, 3”. It a trash pump and does a good job of moving large volumes quickly while excepting a little sand along the way. While it’s very useful filling water tanks, I am interested in a smaller setup that would put out volume at about the rate of a water hose. It would need to be a semi trash design and also since I have no electricity on site it would need to be powered by gas engine or tractor pto. Since I do not always have my tractor gas engine is preferred. I have seen people speak of a ram pump as well. Now that you know what I want, a smaller volume water pump, I would like to hear from anyone that does such and what you use whatever it is. Even a windmill design or since it’s running water a water wheel that would pump water. Interested in anything that works for you. Thanks
 
I use an ag sprayer roller pump that is directly quick coupled to the tractor pto for similar purposes. It could be easily coupled to a small gasoline powered engine like an edger motor. The pumps come in several different sized models and the pressure/volume is determined by the speed of input shaft. I use garden hose connections adapted to the IPT of the pump for easy connect/disconnect and storage. The only downside is it is not easily self priming. I overcome that by filling the intake with water from a container like a drum. You might could use the stream flow to fill the intake. Once primed it does a good job of moving water. Stan
EDIT 2hp B&S
 

Attachments

  • trimmer B&S edger engine.jpg
    trimmer B&S edger engine.jpg
    155.7 KB · Views: 5
Last edited:
I use an ag sprayer roller pump that is directly quick coupled to the tractor pto for similar purposes. It could be easily coupled to a small gasoline powered engine like an edger motor. The pumps come in several different sized models and the pressure/volume is determined by the speed of input shaft. I use garden hose connections adapted to the IPT of the pump for easy connect/disconnect and storage. The only downside is it is not easily self priming. I overcome that by filling the intake with water from a container like a drum. You might could use the stream flow to fill the intake. Once primed it does a good job of moving water. Stan
EDIT 2hp B&S
I had to google roller pump to see what you’re talking about. I actually have a brand new one of these I have had for years and never used. Was not sure of it’s applications. I think I will hunt it up and play with it awile. Hopefully I have not got rid of it.
 
Found it! Thought I might have got rid of it. Brand new never used. Just old.
 

Attachments

  • IMG_5818.jpeg
    IMG_5818.jpeg
    927.2 KB · Views: 5
  • IMG_5820.jpeg
    IMG_5820.jpeg
    1.7 MB · Views: 6
Yup, that's it. I used GHT x 3/4 MIPT brass adapters for quick connecting the hoses. MIPT pvc barbed fittings would also do the job. If you can find an edger frame it can easily be mounted to direct drive or belt drive by a small gasoline engine. I've seen coupling devices made from a section of heavy rubber hose held in place with radiator clamps. Another option would be to mount it on a piece of 2x12 or plywood fastened to a shipping pallet. Stan
 

Attachments

  • p1.jpg
    p1.jpg
    231.1 KB · Views: 5
Last edited:
My off grid cabin is wired for 12 volt led lighting. I use car batteries and built a charger from a 1 wire alternator and a edger like that to recharge my batteries. I could engage the alternator belt with the blade height lever. It worked good but the old engine was in rough shape. I found a good Honda pressure washer someone threw away. It had a bad pump but the Honda engine was good. I retired the edger and put the alternator on the pressure washer frame. It works great! Those little Honda engines are hard to beat. Cranks and runs great.

I never would have thought about using a hose for a coupling. I don’t see why it would not work. Kinda like using panty hose for a belt. I have heard of that for a temp solution.
 
Last edited:
Since you have 12v. power there, how about an Rv style water pump? For Rv use, they have Rv style hose connections but are available with female pipe thread. My weed sprayer uses such a pump. They’ll move a nice stream of water and are self priming.
 
you can get the 12-v spray pumps in all sizes from 1gpm on up course the price goes with volume/pressure. --- the roller pumps are designed for direct drive with support so the weight/wobble is kept down---otherwise it will destroy the bearings and seals in the pumps. ----i grew up on using the old roller pumps on dads sprayer on the farm and we rebuilt them by th dozen at the time!----sure dont miss that nasty job!!
 
Since you have 12v. power there, how about an Rv style water pump? For Rv use, they have Rv style hose connections but are available with female pipe thread. My weed sprayer uses such a pump. They’ll move a nice stream of water and are self priming.
I could see this being useful for small quantities but for watering a garden it may be a stretch. My concern with this style pump though is the water is clean but not filtered. It does get sandy. Thanks for the suggestion, I will consider its useage in some way.
 
Back
Top