Wanted White Wash Recipe

Eugene

501 Club
I lost my white wash recipe. There used to be a recipe on the back of a white portland cement bag - no longer there.

Need the simple recipe using white portland cement, hydrated lime, salt and water.

Needed to cover newly cemented in basement windows and touch up areas of basement exterior.
 
Bill, I should have added that I have searched the internet for an hour or so looking for the simple recipe located on the back of a white portland cement bag. Still haven't found it.
 
Eugene":15twqafx said:
Bill, I should have added that I have searched the internet for an hour or so looking for the simple recipe located on the back of a white portland cement bag. Still haven't found it.
I sould have read your post more carefully. Yo did state that. :oops:
 
Thanks guys. I'll go with the 3 cement, 1 lime, 1/4 salt, and water, recipe.

I only need about a quart per coat - total of 2 or 3 coats.

Research, I wrote down 4 different recipies. Only difference is the proportions.
 
OK... dumb city boy question time...

Why white wash? What does it do? Seems like a nasty concoction to be slinging around... does it help prevent water seepage or bug infiltration?

Mike in La Crosse, WI
 
Whitewash is an old time method for improving looks and weather protection. It was used for years due to the ingredients being available at a reasonable cost. Eugene had to jackhammer out a section of concrete wall to replace a window, and I assume he is using it to match the original finish.
 
Why white wash? What does it do?
I jack hammered out and replaced two windows that were cemented into a poured basement wall. On the exterior I used mortar mix to seal, frame up, return to original appearance the exterior of the new windows.

What I'm am using is a white portland cement, lime mix to touch up around two basement windows. The rest of the poured basement was originally white washed. I purchased the house about 15 years ago and put another coat on about 13 or 14 years ago.

White wash (actually can be any color) is a durable, inexpensive, lime based finish. The portland cement in the mixture creates a near weather proof finish.

I see EJP posted. Yup.

Edit: I need to mix up a quart or so for the first coat. Then apply a second coat a day or two later.
 
WisconsinCubMan":o9dvriy7 said:
OK... dumb city boy question time...

Why white wash? What does it do? Seems like a nasty concoction to be slinging around... does it help prevent water seepage or bug infiltration?

Mike in La Crosse, WI

Good question Mike. On stone and block it is basicly like paint to preserve and look better. We painted our smoke house and fruit celler using straight lime watered down for bug and insect control but had to do it every summer. At least that was what I was taught. Grump
 
Back
Top