wagon ID??

RanchsA

Well-known member
Just wondering if anyone maybe recognizes the make of this running gear? Going to look at wagon today.
Wondering how hard parts will be to find.
thanks,
randy
 

Attachments

  • runing gear 1.jpg
    runing gear 1.jpg
    42.3 KB · Views: 1,486
  • running gear 2.jpg
    running gear 2.jpg
    29.6 KB · Views: 1,486
Check the tire size. If an unusual, hard to find tire, I might pass.

New tires, if a common size, and wheel bearings should be readily available. Wood decking parts should be easily replaced.

Only other thing is that the trailer's steering parts get sloppy after years of use. Depending on steering, might be able to tighten up, or just use, keeping under 10 mph.
 
Most of the old stuff like that will have a logo or name stamped ,cast, or embossed on it some where. Quite often the hub caps.
 
well I'm going to pass on it. Even though the 100 dollar price tag was enticing. The rim was rotted through so it needed more than just a tube like the owner said. Figure I'd have quite a bit more into it by the time I put on new tires and found another rim. The make was a peru. I was able to find a little on them from the almighty google.
 
Peru merged with Electric Wheel Company. My guess is this wagon was pre-merger (maybe 1941). The last series of wagons sold under the IH name were built by Electric Wheel. If your front wheels on your Cub are marked "EWC", Electric Wheel made them.

Edit, added image of ad from eBay:

s-l500.jpg
 
Cool. Thanks for the extra information Jim. If I wasn't in the middle of putting the A back together I'd have probably been a little more brave and maybe taken a trailer down to get it. I should probably get one project done before starting another or I won't have anything to pull it with. :lol:
I found another nearby that is a bit more. Appears to be a David Bradley when I compare the tongue/steering with other photos online. This one has sides and a standard included as well. Seller says tires all hold air but based on pics they will need replacing sooner than later as well. Just trying to add tools (toys) to the A that can help reduce her sitting time during the year.
 
Also them old spoke wheels wont support the load that todays users pile on them ,---PLUS they have old sloppy fit barrel bearings that cant be tightened and getting new ones would be total out of the question. thanks; sonny
 
I actually found another wagon. Was a little more than I wanted to pay but was in pretty solid shape. It is an older David Bradley, I'm guessing comparing pics I have found online. I haven't been able to find a stamp or tag anywhere yet. Has a solid rims rather than spoked wheels on it, and everything seems to be good and solid. Came with the shorter grain sides and a standard as well. I've been meaning to get some pics on since rebuilding the A's motor and steering. We took the whole rig for a hay ride a couple weeks ago. Everything went smooth.
Hopefully I can get some time at the computer to resize some pictures and get them on here shortly. Been a busy last few weeks.
 
David Bradley tag ,(if not ripped off) would be on the back center of axle,--at least mine is, they are good gears if you set toe-in correctly. I always hauled 150 bushels of corn on the gravity bed that it has on it. thanks; sonny
 
Back
Top