Vibration Causing Paint Loss

Dan England

501 Club
The rear margin of the hood on my MH-Pony rests and rubs on the top front of the fuel tank. This is wearing the paint away on the tank. I need something which can be applied to the lower margin of the hood to act as a buffer between hood and tank. Something like weather-stripping for use on a door or window frame, the type where you pull off the thin tape to expose an adhesive surface which sticks to the door frame. But, it needs to be non-porous and made of tougher material than weather stripping. Any suggestions on what might work? Thanks, Dan
 
Dan:

They have adhesive backed rubber strips for car and truck doors, trunks and such that would work well in this situation. I had the same kind of problem with my old Craftsman Ride On... and I went to Canadian Tire, picked up a pack of a half dozen for about $2.50 or so and stuck em to the dash. Worked real well. As far as I know, they are probably still on the dash. If I remember correctly they were about 1/4" or 3/8" wide and about 1-1/2" or so in length, maybe 2".
 
I'm not sure how the Pony tank attaches to the tractor but here's what MH used for my machine. My MH Colt has a braided cotton strip, similar to a wide and flat shoe string, that sits between the fuel tank and the mounting straps to prevent metal-to-metal contact. The only point where the hood and tank could come in contact would be the filler neck poking up through the hood and it's never been a problem.
 
You can get the stuff Carl is talking about at most truck places. Mack dealers should carry it too. Got some for the B61.
 
Carm":lqs0l1h7 said:
You can get the stuff Carl is talking about at most truck places. Mack dealers should carry it too. Got some for the B61.

Got any pics of the B61. 8) 8) I had MANY hours behind the wheel of one. Still remember the aches and pain from the steering wheel while trying to steer and shift, and would have killed for power steering. Grump
:lol: :lol:
 
I'll have to see. it's in disassembly mode now. Actually a friend's that is keeping it at my place during restoration. You must have a crooked back like the rest of the Mack drivers!
 
Back
Top