V-belt

Bus Driver

501 Club
I love a bargain. Bought a V-belt on eBay, the lowest cost one in the size needed. Quickly received a Bestorq brand, no indication of country of origin. The belt is quite slippery and the substance transfers to my hands-- feels like silicone. No doubt the slippery substance is a release agent used to make separating from the mold easier.
But silicone would be a terrible choice for a friction belt. Silicone contamination is virtually impossible to eliminate, so the internet search shows. So installing the belt would contaminate my pulleys permanently.
Washing this belt with Fast Orange hand cleaner did not help reduce the slippery material.
Often release agents are based on liquid soap, water soluble for easy removal.
Anyone with suggestions other than to junk the belt and purchase some other?
 
I would leave a comment on the seller's E-Bay site.

I don't know what you paid for the belt plus shipping. May not be worth the effort to return the belt.

Auto parts store for a quality belt from a known manufacturer.
 
I just spent a few minutes looking on bestorq.com . It strongly suggests an Asian source for their belts. Also seems like they would know better than use a silicone release agent (which wouldn't make it impossible for it to happen). However, I do wonder if maybe the eBay seller shot silicone on some old stock to make it look good.

Were it me, I might contact the seller with the problem. If he doesn't have a solution, I might contact Bestorq. In a pure $$ sense, probably not worth while.
 
Seems likely that the seller did do the spraying. The belt markings do not look old or dirty. When I contacted the seller, the immediate response was a full refund along with the comment that the belt would work fine but that the choice was mine to make.
So I ordered one from a different vendor. From my location, it is 20 or more miles round trip to buy one in a store. Online price including shipping is less than the cost for the driving to the store.
 
Several online sites indicate that isopropyl alcohol will remove silicone. The purest form of isopropyl easily available to me is the red bottle Heet gas line antifreeze. Have some on the shelf here. Not sure if it removed some of the silicone but most certainly did not remove all of it. Might try a shot of brake parts cleaner for the learning experience. Have purchased another belt.
 
I don't know chemistry, so may be stepping off the deep end here. There are ingredients called "poly-silicones" in most make-your-car-shine products, the things we still call wax even if they aren't. I don't know if they are the same things that are in the spray can of silicone or not. There are repaint preparation products (water based cleaners) that are used by body shops to clean that stuff off before refinishing. These things started popping onto the market after "polyglycoat" came along, thus one of the big ones is named "polycracker". I don't know if one of these cleaners would take it off of a rubber belt or not.

Edit:
A quart of one of these cleaners would probably cost about the same as a new belt. So trying it would be more for the sake of the experiment rather than a practical fix.
 
Back
Top