I ventilated the shop much like George talked about, but when Dad turned on the ventilator, it sucked the heat out of the area because it’s so air tight. (20’x 30’) room. He started turning the ventilator off when the saw’s were not running and forgetting not to turn it back on when he was staining/painting Ect. With the dust I always had a big concern for explosions, but the fumes from the varnish/stains/paints, I did not only have concerns with explosions, but with health problems. I was thinking about a heat exchanger for the intake side to see if I could make that work, but he started spending his winter months in a warmer climate.
When you get done the room looks so wide open and then you start adding shelves, equipment and then the appearance shrinks. It seems you never have enough room after you get done with construction. I have 2650 sq. feet of non living storage area, which is more than my living area and I still don’t have enough room for my stuff.
Notice a little red tint on the concrete floor in front of the truck (Dodge) from previous Cub paint jobs.