Trailer hubs

  • Thread starter Thread starter Anonymous
  • Start date Start date
A

Anonymous

Guest
I have a trailer with 5 lug hubs. How hard you think it would be to change that a 6 lug hub?
 
A few things come to mind. You will have to have new hubs, and if it has brakes, drums. Most of the time the 6 bolt hubs are for heavier duty trailers, so the brakes will need changed also. If you are wanting them just for the convenience of using the same wheels as your truck and only needing to carry one spare, it may not be worth the effort. If you are looking to more load capacity, there is also bearings and springs to think about, in addition to the strength of the frame.
 
I have 4 rims with brand new tires that are 6 lug. I'd just like to use them instead of them sitting in storage. lol

DSC02011.JPG
 
I'm sure it could be done. One thing to consider is the rims in the picture. They look to me like they are aluminum. Aluminum rims do not take the side stress as well as steel rims. I have heard of several people busting the centers out of their aluminum rims using them on trailers. May not be a big deal if you only haul light loads, but when you have a reasonably heavy load and turn short corners or are twisting the trailer while backing up bad things have been known to happen. Just something else to consider.
 
I might not do it then. I've had those rims for 2 years and they are just sitting in the storage rental. I wanted to put them to some use.
 
Spindle size. Might have to come up with bearings and seals to match your spindle size and the hubs.

NorthernTool shows several 6 bolt hubs. $52.99 each. and an Ag hub for $49.99 with different bolt circle pattern.
 
Would not be near as pretty, but why not get some 5 bolt rims for the tires to fit. Unless you plan to reinstall the rims on the truck someday, they could probably be sold or traded for enough to get new 5 lug rims. If the tires are much bigger than originals, don't forget to take clearance into consideration, both width and height, including when loaded and when axles pivot on a speed bump type item.
 
John *.?-!.* cub owner":9fonbst8 said:
Would not be near as pretty, but why not get some 5 bolt rims for the tires to fit. Unless you plan to reinstall the rims on the truck someday, they could probably be sold or traded for enough to get new 5 lug rims. If the tires are much bigger than originals, don't forget to take clearance into consideration, both width and height, including when loaded and when axles pivot on a speed bump type item.

I wanted those rims since I had them. I no longer have the Silverado anymore so I have nothing they will fit anymore.

It was just a thought.
 
Those 6 bolt Chevy rims don't have the same size spindle hole as 6 bolt trailer tires.
Its a lot smaller.

Don't think they will work on trailer spindles.

Good luck.
 
Gary Boutwell":1gqqpkum said:
Those 6 bolt Chevy rims don't have the same size spindle hole as 6 bolt trailer tires.
Its a lot smaller.

Don't think they will work on trailer spindles.

Good luck.

These will. I have put them on a friends trailer to see.

They fit on his hubs, anyway. Whether then will on another 6 lug I do not know.
 
I have another possible option.

My trailer has 6 lugs wheels on it. :mrgreen: :mrgreen: :mrgreen: :mrgreen: :mrgreen: :mrgreen:
 
Back
Top