beaconlight
501 Club
I bought a Reese Hitch for my 2003 Dodge 1500 Long bed. I found a plug in the rear that looks as if it is to plug the light plug in to. I bought one with a 4 prong receptical as well as a 6 prong. From things I have been reading for the trailer lights I should add an extra lead with juice through a relay as well as adding a brake controller and extra wire for it also. There was some discussion in some of the posts about burning out the headlight switch with the extra marker lights. On my old 79 chevy I just cut in to every thing and ran it to the plug. I towed some hellacious loads with out trailer brakes but don't want to do that any more. Beginning to wonder if I should have gotten a 7 pin to add a 12 14 gauge all hot as well.
I need all the words of wisdom I can get on this before I go any further. What really bust my back on this is that when I first bought the truck I was going to have one installed but something was not in stock and had to be ordered in. I didn't have the patience 2 years ago.
Bill
I need all the words of wisdom I can get on this before I go any further. What really bust my back on this is that when I first bought the truck I was going to have one installed but something was not in stock and had to be ordered in. I didn't have the patience 2 years ago.
Bill