touch control parts

Tim B

New member
Hello all. My cub touch control/hydraulics lock up when hot. I tore everything apart and cant find anything wrong but worn check valves (the plastic thingys) Anyway, does anyone know where I could purchase new ones? The pressure regulator valve is actually pitted and worn and the safety valve has some sort of coating coming off? Thanks so much
 
Hi,
TM Tractor at the bottom of the page has some Touch Control parts, and rebuild kits.
Below is their Hydraulic page.

http://www.tmtractor.com/new/hy/hy_001newparts.htm

It would be helpful to know what year Cub it is, and the part number cast in the Touch Control block. IH changed them over the years.
You might have to buy some parts at Case IH.
 
Thanks for the reply Glen. My tractor is a 1959 and the hydro box is # 360719-R1. I studied the service manual and seem like there maybe a crack in the block or a bad head gasket. I just don't see them. All the O-rings seem good. The orfice and screen look good. I guess I'll just clean everything and replace the O-rings and gaskets and try again. Thanks again Glen
 
Back
Top