Tools..

ToddW

501 Club
This should help to clear up any misunderstandings you may have about tools...

DRILL PRESS: A tall upright machine useful for suddenly snatching flat
metal bar stock out of your hands so that it smacks you in the chest and
flings your beer across the room, denting the freshly-painted project
which you had carefully set in the corner where nothing could get to it.

WIRE WHEEL: Cleans paint off bolts and then throws them somewhere under
the workbench with the speed of light. Also removes fingerprints and
hard-earned calluses from fingers in about the time it takes you to say,
'Oh sh--'

SKILL SAW: A portable cutting tool used to make studs too short.

PLIERS: Used to round off bolt heads.. Sometimes used in the creation of
blood-blisters.

BELT SANDER: An electric sanding tool commonly used to convert minor
touch-up jobs into major refinishing jobs.

HACKSAW: One of a family of cutting tools built on the Ouija board
principle. It transforms human energy into a crooked, unpredictable
motion, and the more you attempt to influence its course, the more
dismal your future becomes.

VISE-GRIPS: Generally used after pliers to completely round off bolt
heads. If nothing else is available, they can also be used to transfer
intense welding heat to the palm of your hand.

OXYACETYLENE TORCH: Used almost entirely for lighting various flammable
objects in your shop on fire. Also handy for igniting the grease inside
the wheel hub out of which you want to remove a bearing race.

TABLE SAW: A large stationary power tool commonly used to launch wood
projectiles for testing wall integrity.

HYDRAULIC FLOOR JACK: Used for lowering an automobile to the ground
after you have installed your new brake shoes, trapping the jack handle
firmly under the bumper.

BAND SAW: A large stationary power saw primarily used by most shops to
cut good aluminum sheet into smaller pieces that more easily fit into
the trash can after you cut on the inside of the line instead of the
outside edge.

TWO-TON ENGINE HOIST: A tool for testing the maximum tensile strength of
everything you forgot to disconnect.

PHILLIPS SCREWDRIVER: Normally used to stab the vacuum seals under lids
or for opening old-style paper-and-tin oil cans and splashing oil on
your shirt; but can also be used, as the name implies, to strip out
Phillips screw heads.

STRAIGHT SCREWDRIVER: A tool for opening paint cans. Sometimes used to
convert common slotted screws into non-removable screws and butchering
your palms.

PRY BAR: A tool used to crumple the metal surrounding that clip or
bracket you needed to remove in order to replace a 50 cent part.

HOSE CUTTER: A tool used to make hoses too short.

HAMMER: Originally employed as a weapon of war, the hammer nowadays is
used as a kind of divining rod to locate the most expensive parts
adjacent the object we are trying to hit.

UTILITY KNIFE: Used to open and slice through the contents of cardboard
cartons delivered to your front door; works particularly well on
contents such as seats, vinyl records, liquids in plastic bottles,
collector magazines, refund checks, and rubber or plastic parts.
Especially useful for slicing work clothes, but only while in use.

Son of a b#$% TOOL: Any handy tool that you grab and throw across the
garage while yelling 'Son of a B#$%' at the top of your lungs. It is
also, most often, the next tool that you will need.
 
I got two sets of those . One at home and another in the country. Except that is when I need one home there are 2 in the country abd vice versa.
 
The 4" hand grinder great for throwing sparks were you don't want them to be.

Also the 4" handgrinder with the wire cup brush its the deadlest tool in your shop. It can wrap up in your shirt at anytime and cut you. It can grab and jump out of our hands and can be headed for any part of your body. It can seek out bare skin at anytime. Wearing leathers head to toe will solve the mean cup brush from finding flesh when its hungry. Its the on'off switch too it locs on when the plug unplugs then you plug it back in and its on running all around the floor looking for flesh too. While your doing a scottish dance trying to stay away from it. Again ouch..... :cry: .

How about the 1/4"to 1/2" milwalki drill with the paddle switch that takes up most of your hand. You just can't let it go when the drill binds nor can you shut it off. Where's Ralph Nader on this one. Were holding the drill by the on/off switch and we can let go when it binds up. I have had spinning drills when i let go or just break the drill bit while tryingto figure what to do in mili seconds.. :oops: ... :roll:

The cutting torch your welding gloves, they aren't a holder for the torch while its lit when your hand is still in the glove. Can you say ouch??? I've seen it done. :cry:

We just get welding a thing of beauty and we just have to touch it while its still very hot. Or we lean on it to weld it somemore and our skin melts like a candle.
 
When my house was being built, the plumber was using a "Hole Hog" to cut some 4" holes for drainage.

You ought to see one of those things bind. Threw the "helper" across the floor.
The Plumbers response was "Thats why I don't use the thing!"
 
Back
Top