Todays project

Posted: Mon Feb 06, 2006 4:41 pm Post subject:

--------------------------------------------------------------------------------

Steve,

Are you using a compressor & paint gun or rattle cans

Don I use a 7 HP compressor with an upgraded high volume pump and an HVLP paint gun with the 2150 IH paint. I don't care to use the rattle cans except to cut in at the joints as I assemble and for the smaller parts
 
I have slowly started to put the parts back on as they come out of the paint booth

h%20farmall%20006.jpg
 
Well here it is After we had to repaint due to an overspray problem
The carb is being rebuilt and the mag is in the process if being cleaned up It will be going on full steel. Enjoy Steve

H%20farmall%20001.jpg
 
Back
Top