Threaded insert taps

Bob McCarty

Moderator
Staff member
Can anyone tell me if the taps for different brands are the same? For instance, can I use a tap from a helicoil kit and then made a bottoming tap out of a permacoil kit and have them compatible in the same hole? Also, would the inserts be interchangeable?

Thanks, Bob
 
Bob they are the same thread. That is how I made my bottoming tap for the carb inlet. I could not find a bottoming tap and when I did the cost was real high. I bought a regular tap and ground it down. If you want bring them in Oct and we will do them here.
 
Back
Top