it is a waste of time to click on most of the links to photos and anything with sound or movement just never gets there.
phantom,
in the 'misery loves company' department, i too cannot view any video links period. For a 15 second video, it takes a couple minutes just to get one second of piecemeal video&audio, then another couple minutes for the next second of video....YouTube is out of the question!
Having said this, downloading say a large 600X800 pixel still photo only takes anywhere from 5 to 20 seconds depending on the complexity of the photo and the compression algorythm used.
______________________________________________________
Having been involved with dial up modem design with the last company i woked for here are some things to be aware of if you aren't already.
Have your phone company run a detailed diagnostic test on your phone line. Make sure they give you the specs. on paper. Sometimes they can fix a noisy line just by tightening up loose connections, changing out an underground spliced cable or changing a printed circuit board at their central office.
Make sure your modem's connection string is set correctly for optimum down load speeds such as making sure hardware flow control is enabled, data compression is enabled, etc. If you're running Windows XP you can check the string by going into Control Panel, Phone & Modem Options, Modems tab, Properties, Advanced tab. Make sure you Cancel out if no changes are intended. Check the string against modem's owner's manual's AT command definitions to see what the modem is actually doing. Sometimes the ISPs modem settings aren't always the best.
Also setting a 56K modem to connect at the highest rate can sometimes actually reduce the average data flow rate especially if the modem doesn't have fallback capability. A modem may be able to connect at a high speed but with many data errors, requiring the modem to request retransmitted data blocks from the ISP which has the net effect of reducing the flow rate. I have my modem set to connect at a maximum connection rate of 26.4Kbps which is the highest dependable rate without data errors i can get from my phone line. I determined this by trial & error and by looking at the number of retransmitted blocks from the I6 screen in terminal mode.
Make sure the PC's port baud rate is set to at least 115.2Kbaud
Note: some older PC's using RS232 serial I/O modem ports are not capable of this high port speed. Check the PC's owner's manual or the PC's Bios setup for clues.
You can check the port speed as above for the connection string but select the Modem tab instead of the Advanced tab in the Modem's Properties window.
Certain AV and Firewall software can have a significant negative effect on data flow rates as well as slowing down the PC in general. Some AV softwares are memory hogs and PC processor hogs.
I'm currently using Kaspersky AV/Firewall which has the added benefit option of it totally exiting memory allowing me to play my favorite Civil War strategy game, "Take Command 2nd Manassas" without any video freezes. Offline of course!
Make sure you have no spyware or malware running in the background.
Make sure there are no other windows open espeicially IE windows while surfing the net. Another inactive window sometimes keeps down loading while trying to simultaneously download the active window.
Make sure you have Windows Automatic Updates and AV automatic updates disabled. Download the updates manually. They could be udating in the background taking up precious dial up bandwidth. In my eperience MSN Explorer (not IE) is the absolute worse as they've forced extremely long updates without any notification. In addition MSN Explorer downloaded site favicons which were previously deleted from the Temporary Internet Files again with out notification.
MSN Explorer uses the IE datapump kernal and adds its GUI around it further decreasing overall efficiency.
Beware of MSN Explorer..its a definite bandwidth killer for slow dialups!!
I'm currently running IE7 with no such issues.
Delete the Temprary Internet Files routinely.
-Ken