Serious About Firewood

  • Thread starter Thread starter Anonymous
  • Start date Start date
A

Anonymous

Guest
Here is Earl and his wife JoAnn with there wood pile. Since this pic there is much much more.
84789245.jpg

84789295.jpg
 
I am having trouble with perspective. How long are those pieces. They look 2 foot or more long and split small. Then again it could be the angle. Only reason I ask is small splitting is a lot more work. Some of it looks like last years wood not burned. That is good, much better than running out of wood. What is the advantage of the sleepers on the ground and plywood on top? I support my piles with 4x4 or 4x6 on cement blocks to let air top and bottom. I ask questions because life is so short and there is so much to learn. I don't have time to make all the mistakes myself so that I can learn from them.

Bill
 
Man the termites called my house an said they will be home for the winter. They will be staying here at the great wood pile.
Jeff
 
Bill, The wood is split down pretty far as all is used in a fireplace. I split mine down pretty close to what you see also so it will dry faster. I never seem to have the time to get enough surplus ahead so I split it pretty small in hopes it will be dry sooner. We both stack on 4x4 pallets and earl has used some scrap whatevers on top of them to try and keep ground moisture to a minimum. He like to have about 2yrs ahead. Also he has an addition to his walkout basement that holds several cords in an unheated area just a few steps from the fire.
This yr we are into it big. Down the road they logged out 10+ acres and Earl got firewood rights to the tops. Theres more wood then we could ever get before it rots. It will be a busy winter cuttin all that wood. It would be neat to have a processor but they are big bucks and we are a small time operation.
 
Thanks Bill. I admire Earls stack. Firewood rights to the tops is a great deal.
I do a lot of splitting with an old "Lickety Splitter". I keep mine to about 6x6 or 8x8 when I split big stuff. I use a "Thermo Control" stove. It has coils in it and I run to convectors and radiators. That way i can use big stuff.
I knock down my own trees. Either undesirable species or stand improvement so I have plenty of small stuff for starting and for warm days. I prefer a small fire that I don't have to choke the air down. I don't like the smoke that causes and the creosote build up it creates.
 
Bill:

We pile our wood on pallets.. 4 foot as well as 16". Keeps it from rotting.. air gets under as well and helps dry. The plywood on top, acts like a roof and keeps 90 % of the moisture OFF of the wood, helping it to dry and to stop fungi from growing if left for over a year.

I intend to build 3 or 4 8'x32'x8' shelters to air dry my cut wood for the furnace. I also intend to have screened panels for the Spring/Summer/Fall period and Plywood panels for winter. That way I get maximum keepablility (better word would be nice) for my firewood.

I generally make sure I have anywhere from 10 to 15 cords cut at any one time. That way I always have 1-3 years of firewood. Right now, I have 9 cords in the house and 14 outside...

edited:

Oooops :oops: :oops: :oops: I wasn't paying a lot of attention I guess to WHERE that plywood above was located :roll: :!: Here we (I use the pallets then pile the wood on the pallets.. the plywood or whatever would be used as a temporary roof.) In the picture, it would seem to me that the plywood would just hold water and keep the bottom row wet :?: :roll: :?:
 
Rudi, As soon as I can get some other projects finished I too intend to build a wood shed. I hate knocking snow off wood I intend to burn in the winter.
 
Wow, I heat a 1700 sq.foot living area and I when I was cutting wood for heating, usually 3 to 3 1/2 cords a year during normal winters. I really had a good time going out and cutting wood, but my time allocation just ran out. Maybe someday again.
 
Jack:

My house has 3 floors - 1200 square feet per floor. The basement ceiling is 10 foot need to the underside of the beam and almost 11 feet to the underside of the joists. You can play basketball in my basement.

No don't ask why :?: :roll: :roll: Has to do with a City Engineer.... :roll: :wink: :shock:

Anyways, we have 36,000 cubic feet of building to heat and we do so even with our cold winters here for usually less than 5 cords of MIXED hard and soft wood. Not too shabby and is a testament to a well insulated but breathing building.
 
Wow....... :shock:

Gentlemen, I am truly impressed.

You all know that I consider burning wood as one of the most important things a private citizen can do to save our world from the impending disaster that is coming in the next century.....

It also is a very concrete way to produce resources for yourself that do not leave your possession. Your labour in cutting, splitting, stacking, and hauling firewood is something that is completely yours.....it is not taxed away from you, given to oil companies, coal companies, foreign enemies, or the like.

So, if you are one of those who consider your labour time to be very valuable, but calculate that you only make $2/hr or $5/hr working with firewood, you must consider all of these factors on top of that.

But, on top of all of this, one must consider that you are not loading up the atmosphere with Carbon Dioxide from fossil fuels, but are, in fact not contributing one little bit to the "Carbon Load" of our atmosphere at all......

Very good gentlemen..... I am so very proud of all of you who choose this method, even if it only produces a portion of your heat....you are doing more than your fair share of saving our climate for posterity.....

Even if saving the Earth isn't your motivation, and economy or the love of the outdoors is, your merits are very great nonetheless.

In a way, this is compassion in action............ :D
 
It's pretty hard to calculate the financial benefit of cutting your own wood. Locally the cheapest wood is $35.00 for a "thrown on" pickup load. Tuesday I cut up some downed trees into firewood sized chunks and loaded the pickup. 2 hours time. Lucked out - did pretty good.

Of course I have $4000- worth of equipment to figure into the cost of that load of firewood, plus insurance, fuel.

The side benefit is that we (son and I) are cleaning up his acerage.

I need the exercise.

Eugene
 
When I was cutting firewood I got permits from the Missouri Conservation to cut on Conservation land. Sometimes I would have to drive 2 hours one way to get to a state park where the permit was issued. I cut and filled a 16’ trailer with boards for sides and truck bed at one time. Usually I started cutting when the sun came up and quit when the sun went down. I ended up with about 1 ½ to 1 ¾ cords of oak and hickory on the truck and trailer at the end of the day. That was a pretty good load for a ½ ton truck. When I got home and unloaded it,it was bed time. The next morning up at 3AM and start over again. Those were the good old days… ya right….
 
Rudi wrote:
we have 36,000 cubic feet of building to heat and we do so even with our cold winters here for usually less than 5 cords of MIXED hard and soft wood. Not too shabby and is a testament to a well insulated but breathing building

Wow Rudi,

If I lived in a house that size I could have my own private section. You must have it insulated well. You said the basement had 10’ ceilings how about the rest of the house? Just curious Rudi, what “R” factor should you have for insulation in the walls, ceiling and windows in your part of the country? In this area we have 19(R) walls 38 ceiling and my windows are low “E” which I think is 6.5.
 
Jack:

Walls = R32
Ceilings/floors R=48 minimum
Basement walls= R20
Cold room = ceiling R=20 - exterior walls == R0

Rest of the house is normal residential construction.. The basement has 10 foot cause the engineer screwed up big time.. instead of a 1/2 rise over 50 feet he thought it was supposed to be 1 inch rise.. so instead of a 2 foot slope for the waste, I have almost 5 feet of slope. Needless to say, I have NO waste disposal problems at all :roll: :shock: :roll: :!: :lol: :lol: :lol:

As for volume, I basically rounded it off -- it is probably closer to like 34,600 cubic feet.. -- there is 9,920 on the main floor, 9,800 on the second floor and 14,880 in the basement, counting all the open space that must be heated...

I also add in a fudge factor to allow for the latent humidity left over from hauling in 9 cords of firewood.. it is substantial and amounts to a fair amount of extra heat required to build up the mean house temperatures.. so 36,000 is a good rough figure for determining needs.

And you must remember, these days I am the ONLY male in a house with 5 Females -- :!: :wink: :shock: :shock: :lol: :lol: :lol:
 
Does anyone know if radiant heat from the floor can be used if one has a wood burning stove? Is there any wood and/or coal stove that would work if one went ahead and put the proper coils into the concrete of the floor?

Richard
 
Little Indy":32lmsmix said:
Does anyone know if radiant heat from the floor can be used if one has a wood burning stove? Is there any wood and/or coal stove that would work if one went ahead and put the proper coils into the concrete of the floor?

Richard

If the wood stove heated the water, then it just needs a circ pump and thermostat. Check the website or call Radiantec, they should be able to get you the info you need.
 
Little Indy":315lc6qi said:
Does anyone know if radiant heat from the floor can be used if one has a wood burning stove? Is there any wood and/or coal stove that would work if one went ahead and put the proper coils into the concrete of the floor?

Richard

My cousin has been using floor radiant heat from a woodstove for over 15 years...... His system is not in the concrete, but is the flexible plastic pipe and aluminum reflector system stapled to the underside of his floor joists.

If the system builds too much heat, he has it rigged to "dump" the heat into his garage/workshop floor via the type of system you mentioned above. Since the Garage/workshop is the entire basement of his house, he doesn't lose the excess heat then. It eventually finds it's way upstairs, and keeps the basement warm in the meantime. The woodstove is in the basement, next to his oil boiler, which hasn't run, except for winter vacations, in many years. This way, his wife doesn't need to know what bizarre arrangements he's rigged up, or deal with the wood mess, since she doesn't park her car in the garage, and has never set foot in the basement to my knowledge.
 
Back
Top