John Niekamp
501 Club
I am not sure where to place this topic at so I decided to stick here since it doesn't really pertain to Cubs or does it? It can be used on 6 volts as well.
I purchased this little item to be able to keep a little closer eye on my motorhome's coach battery. It's quick, compact and easy to use.
Since I was trying to charge up a very low coach battery on my Lesharo last year from the engine's charging system, the alternator got very hot and melted the solder in diodes and took out the field, so needless to say I have been really cautious ever since. Even though when I converted the Renault engine/transmission over the GM 3800 I also installed a higher amperage output alternator on the engine in hopes this would help.
The guy who rebuilt my original Renault alternator told me it was probably due to the fact that I was trying to charge a dead or very low deep cycle battery off the engine's charging system and this really overtax the alternator. He suggested that I should check the voltage of the coach battery and use a battery charger to charge the battery overnight first and then use the alternator to maintain that level of charge so the alternator will not become over taxed again. I have a switch on my dash that I can charge the coach battery as needed or when ever I want, but I don't have an ammeter, just a volt meter, so I can't tell how much current is actually doing. Probably if I had an ammeter at the time I would have noticed where it was really sucking up the current, I would have definitely known something was wrong.
I'm guessing with a regular 12 volt car/truck/tractor battery it doesn't cause any harm to the alternator to bring them back up from a discharge state??? I guess it's due to their thinner plates?
On this digital meter, what I DON'T really understand is the letters "SLI" and "VRLA" (right hand columns) stand for and the manual was of no use either. It just said how to hook it up and that was basically that was it. Even Schumacher's web page here at: http://store.schumachermart.com/bt-50.html
says even less than what the so-called manual did.
This is a picture of my meter, can anyone tell me what the "SLI" and "VRLA" represent??? other than they are voltages of some sort.
Thanks for any thoughts,
John
I purchased this little item to be able to keep a little closer eye on my motorhome's coach battery. It's quick, compact and easy to use.
Since I was trying to charge up a very low coach battery on my Lesharo last year from the engine's charging system, the alternator got very hot and melted the solder in diodes and took out the field, so needless to say I have been really cautious ever since. Even though when I converted the Renault engine/transmission over the GM 3800 I also installed a higher amperage output alternator on the engine in hopes this would help.
The guy who rebuilt my original Renault alternator told me it was probably due to the fact that I was trying to charge a dead or very low deep cycle battery off the engine's charging system and this really overtax the alternator. He suggested that I should check the voltage of the coach battery and use a battery charger to charge the battery overnight first and then use the alternator to maintain that level of charge so the alternator will not become over taxed again. I have a switch on my dash that I can charge the coach battery as needed or when ever I want, but I don't have an ammeter, just a volt meter, so I can't tell how much current is actually doing. Probably if I had an ammeter at the time I would have noticed where it was really sucking up the current, I would have definitely known something was wrong.
I'm guessing with a regular 12 volt car/truck/tractor battery it doesn't cause any harm to the alternator to bring them back up from a discharge state??? I guess it's due to their thinner plates?
On this digital meter, what I DON'T really understand is the letters "SLI" and "VRLA" (right hand columns) stand for and the manual was of no use either. It just said how to hook it up and that was basically that was it. Even Schumacher's web page here at: http://store.schumachermart.com/bt-50.html
says even less than what the so-called manual did.
This is a picture of my meter, can anyone tell me what the "SLI" and "VRLA" represent??? other than they are voltages of some sort.
Thanks for any thoughts,
John