RUSTY BOLTS / RUST REMOVER / GAS TANK CLEANER

Status
Not open for further replies.
'Country' Elliott":1fn2ueq3 said:
SADLY Mike...The Kroil folks have made one BIG error! Everytime ya try to POUR your Kroil from the gallon can into the handy Kroil squirt oiler...you LOOSE about a quart on the work bench! I wish they'd invent a handy Kroil Pump (guess I'll have ta do it myself)...Will report back later with a FIX for this! :wink:
Click to expand...

Hey Country... if you don't let it get LOOSE, you won't LOSE it. :lol:
 
Arizona Mike":3hgssgt2 said:
JB, I used Kroil to help free the rusty swivel on my old crank. Put it into a small vise and used that micro oiler to put small amouts of Kroil on each end..one end at a time. let each end soak for a couple of days, then put it between two 1/4" steel plates and popped it with a small sledge a few times...then back in the vise for more kroilin...then pound it again..you get the picture i think.
Click to expand...


Mike I soaked this handle for 3-days and even heated it to where the Kroil was bubbling out the end. This crank I am working on is for a JD. LA tractor and the handle only has one open end. The butt end is closed and a domed shape. Best way I can describe it would be to compare it to a cigar tube over the handle end of the crank. I think the big sticking problem with trying to get it to turn is that there is a couple of dents in it that might be locking it from turning.
 
'Country' Elliott":31jmo9ob said:
I know the guys will ONLY cut me A LITTLE SLACK when I talk about the MANY benefits of KROIL (http://www.kanolabs.com) in Nashville, TN.

If you've got RUST...GET KROIL! :wink:

1) Rusty wheel rims?...Spray KROIL right on your sandpaper and watch the rust dissolve. Works GREAT on removing ANY form of surface rust! :D

2) Rusty gas tank?...KROIL and pea gravel in your tank (after you've drained the gas & removed it)...just slosh it around in the tank for a few days...remove...let dry...then seal with commercial tank etcher & sealer. :D

3) Rusty bolts & nuts?...Spray on KROIL, or soak them in it for a day or two. KROIL removes & dissolves the rust. :wink:

4) Seized rings or pistons, or valves? :cry: ...KROIL poured through the spark plug holes (seeps past the rings and dissolves the rust). Spray it on stuck valves, or valves springs...STUCK NO MORE! :D
Click to expand...

Hi Where can i get this KROIL
Thanks David
 
Status
Not open for further replies.
Back
Top