replacement radiator

[Dusty B]

I know this has been covered before but has it been settled? the best source for a replacement radiator?? W hen I turned my cub upside down it kinda bent things out of plumb! Radiator shop says not a good chance to straighten! Does have kind of an S curve in it!!

 

[DJ54]

I don't know how it compares in price to others, but I was very happy with the one I got from American Radiators for my Farmall 140. It is very heavy in construction, mine was made in India. This will be the 4th year for mine and no issues so far. Here's a link to one for the Cub: https://radiatorpros.com/catalog/pr...rnational-tractor-radiator-359558/category/2/

 

[Barnyard]

Dusty, how big of a hurry are you and does it have to be new? I have a few on the shelf I can check out and you can get it at the Bash.

 

[Dusty B]

I know this has been covered before but has it been settled? the best source for a replacement radiator?? W hen I turned my cub upside down it kinda bent things out of plumb! Radiator shop says not a good chance to straighten! Does have kind of an S curve in it!!

Not in a hurry, would need the side support frames also. Was going to ask you to save me 2 sets of steps and a crank too!

 

[Dusty B]

I don't know how it compares in price to others, but I was very happy with the one I got from American Radiators for my Farmall 140. It is very heavy in construction, mine was made in India. This will be the 4th year for mine and no issues so far. Here's a link to one for the Cub: https://radiatorpros.com/catalog/pr...rnational-tractor-radiator-359558/category/2/

Thanks, if Bill doesn’t have one that works will have another source!

 

[Greenthumbfarms]

I bought a "PAL Radiator" from Hamilton Bob's. The radiator works perfectly but it had side supports and fit wrong at the hood supports, requiring modification. Not the end of the world but it was frustrating.

 

[JohnMihevic]

The Clancy radiator I bought from TM Tractor fit perfectly. It is made in Ireland. Previously, I bought a CNH radiator. It was made in China was of thinner construction with a short fill neck. I had to grind down the "turning tabs" on the radiator cap to get enough clearance to tighten the cap. It still scraped the hood even then. The Clancy is a bit "pricey" but well worth the cost.

 

[brewzalot]

The Clancy radiator I bought from TM Tractor fit perfectly. It is made in Ireland.

Just curious, how long ago was the purchase?

Thanks
Tim

 

[Bob McCarty]

Several of us have Clancy's where the radiator neck does not match up to the engine neck. Maybe it's been corrected, but I'd specifically ask Ron at TM about that if you decide to order from them.

 

[JohnMihevic]

Just curious, how long ago was the purchase?

Thanks
Tim

About 5 year ago.

 

[tst]

few months back when I spoke with TM they said they were not selling radiators anymore due to all the past issues with them

 

[tractorjunky]

A cub I bought a few years ago had a radiator from Northern Radiator: Cub Radiator

Fits and works great.


I ended up making an overflow tube that is routed like the original.

 

[tmays]

few months back when I spoke with TM they said they were not selling radiators anymore due to all the past issues with them

I suppose it may not mean that they are selling them now, but they have one listed on their site for $265 and change