? regarding hydraulics on Super C Farmall

[Bezirk]

Is it possible to add a hydraulic "block" to the Super C to operate a remote device ? If so does anyone have a source for purchasing a block
Thanks, Berlin

 

[TWheat]

I don't know if you ever got an answer , but the one for a super A should work on a C. I got mine from,

P Tutusha
301 Colvin Ave.
Buffalo, NY. 14216

Sorry , I don't have a phone #.

 

[Boss Hog]

http://www.ebay.com/itm/Hydraulic-By-pa ... 4605ac0f76

That should fix you up :wink:
Boss

 

[Boss Hog]

The originals were made different and took different lines
But the one above should work

 

[Bezirk]

Thanks ,I'll relay the info. and I do appreciate your responses.
Berlin

 

[Matt Kirsch]

I can relate first hand, that particular block works MINT on a Super C.

We've got a two-spool hydraulic valve running a fast hitch and a rear remote on Dad's Super C. Now that we got the governor issue sorted out and it's turning the prescribed 1800RPM, it's a handy little tractor.

 

[TWheat]

The link Boss Hog provided is the one . I had lost the ebay link.

 

[Smokeycub]

I was searching for info on SC hydraulics and came a crossed this old post about adding a remote on an SC. I want to add a second remote to mine. Currently it has the factory remote for the Fast Hitch. Would this bypass block work? One guy on e-pay mentioned it was not for a Fast Hitch set up. https://www.ebay.com/itm/Hydraulic-By-p ... 0005.m1851
For whatever reason he specifically said not for SC with Fast Hitch. Is that because it already has a remote? What am I missing?

 

[JoeB]

You would need to have a machinist make 2 special shouldered bolts for the aux valve with extra length to account for the block. There might ve clearance issues with the rod that goes to feont yolk on fast hitch as well. I can't see any other issues you would run into.

 

[Smokeycub]

Thanks Joe - Good information.

 

[Smokeycub]

There might ve clearance issues with the rod that goes to feont yolk on fast hitch as well.

You're absolutely right. With that rod connected to the rock shaft there is no clearance between the rod and the remote valve, certainly not enough for a bypass block.

 

[Gus Keeter]

I wanna jump in on this thread. My control valve for the fast hitch leaks like a sieve. I have looked around but not much luck. It appears to leak from a small plug on the side of the unit but that plug is super tight. Are there "rebuild kits" or anything I can do for it?



Im not sure why my pics are posting sideways......

 

[Gus Keeter]

http://www.farmallcub.com/phpBB2/viewtopic.php?t=92567


Behold....my answer