Rear rock shaft dimensions

[Farmallsodbuster]

Would someone be so kind as to give me the dimensions outlined in the photo? I know it’s crude but maybe understandable. Also is the flat bar a 90 degree angle from the round chain connect bar? It appears to be. Thank you

 

[Bill V in Md]

My rear rockshaft is different compared to your photo. As you can see in the below photo, the mounting plate is a different shape, and there is a separate angle bracket that attaches to the round bar. I have another rockshaft for a manual lift, but both are similar in design. In any event, I took the dimensions of my rockshaft for reference. Hope it helps.

 

[Farmallsodbuster]

My rear rockshaft is different compared to your photo. As you can see in the below photo, the mounting plate is a different shape, and there is a separate angle bracket that attaches to the round bar. I have another rockshaft for a manual lift, but both are similar in design. In any event, I took the dimensions of my rockshaft for reference. Hope it helps.

It absolutely helps. Thank you so much for you’re time and trouble!

 

[Barnyard]

What Bill V has pictured is for a Manual lift omr pic is original the other is a modified lift. Below is a hydraulic lift rockshaft.

 

[Farmallsodbuster]

What Bill V has pictured is for a Manual lift omr pic is original the other is a modified lift. Below is a hydraulic lift rockshaft.

View attachment 75247

Thank you!

 

[Farmallsodbuster]

Thanks to your kind help with the dimensions I built my custom rock shaft out of some old gangs material out of an old disk I cut up. It might not be as pretty as original equipment but I just want it to pick up my plow. Now to mount it and find some material to make a rod. Any idea how thick the original rods are? I suppose I can measure the hole in the front rock shaft. I have the long hood so it appears the bent rods are used on these.

 

[Bill V in Md]

The rod is 3/4”.

 

[Farmallsodbuster]

The rod is 3/4”.

Thanks