Radiator repair

[tmays]

Overflow tube on my cub has broken loose from the radiator neck. How should I repair this?

 

[challenger]

Here is some info.

http://www.farmallcub.com/phpBB2/viewtopic.php?f=1&t=57488&p=473511&hilit=overflow+drain+fix#p473511

 

[Rudi]

Best way is to take the rad to a real good quality Gas Tank & Radiator Repair Shop. They can do the job right.

 

[Bill E Bob]

Repaired mine with a propane torch, some solder and a very light touch. A little heat applied sparingly--too much and you remove the filler neck (don't ask ) I'm gradually learning proper radiator repair techniques :roll:

 

[Bigdog]

A wet rag wrapped around the filler neck helps a lot when soldering the overflow tube. It will sap a lot of heat from the neck-to-tank seam while you are focused on the overflow tube.

 

[Bill E Bob]

A wet rag wrapped around the filler neck helps a lot when soldering the overflow tube. It will sap a lot of heat from the neck-to-tank seam while you are focused on the overflow tube.

Now you tell me :roll: :wink: 'Course now I know how to solder on a filler neck :roll: