Question for the diesel gurus.

Jeff D. N.E. Wis.

Well-known member
I was taught many years ago in school that on the old Detroit Diesels (2 cycle) that if a seal on the blower would fail and when you shut the fuel off, it would suck in its lube oil and run away. The question I have is, today would this be a possibility on a turbo engine if a turbo seal would fail? Thanks.
 
Jeff; I am not a diesel expert, but I own 1 and subscribe to 2 diesel forums. I have never heard reference to any turbo-charged diesel "running away". I think that was a problem associated with the old G.M. "blower" engines. Frank
 
Years ago I blew the seals in 2 M&W turbo's never had a problem shutting down, just a mess to clean up. And of course lots of blue smoke.
 
I've heard that it can happen, no experience with one, broken or working. I suppose it depends on whether it blows out the intake side or exhaust side.
 
In the 90's, Jeeps(CJ's) use to put Isuzu diesels in some of the export versions. All of the "Heavy Repair" mechanics use to have a metal block ,in arms reach, that they would quickly slide over the air intake opening, to shut it down. You didn't dare stick your hand over the opening, or anything soft like a rag. Every once in a while, (2-3 times a month)you'd hear an engine just scream wild, because the mechanic misplaced his block :shock: Those "run away" engines would always get pulled with a new one installed. We weren't allowed to get that involved with that kind of tear down. Jeep would send the engines back to Isuzu for credit.

Rick
 
Jim stated in part:
I suppose it depends on whether it blows out the intake side or exhaust side.
Jim is correct; if an intake side of a turbo charger seal fails it will cause a Diesel engine “run away”.

Improvements have been made through out the years on turbo charger / blower super charger bearings but, bearings still wear and seals will leak. Part of owning a Diesel powered vehicle is checking the turbo charger / blower super charger bearings for wear.
 
I have worked on diesels for 30 years. I that time I have seen one runaway. A mechanic left a flex-spout oil filler can on top of a V-8 Cumminings. the spout dropped into the air intake.
Detroits are kind of a differnent animal because they are 2 stroke. they have an emergency stop that shut off the air.
A turbo seal could cause a runaway, but odds are low unless the drain was blocked.
 
I know it mentioned runaway in the owners manual of my old 93 dodge with the cummins. The injector pump on that one had a manual shut off in case of a runaway. Runaways can also be caused by fumes from volaitle fluids being sucked in the air intake. Maybe I'm an exception, but it's happened to me twice. The first time someone spilled a lot on gas on the ground and I didn't notice and parked the front of the truck over it. Lucky for the manual shut off, I was able to shut it down before any damage was done. The second time the governor went. I called cummins on that one and they replaced the injector pump at no charge. They told me that rarely happens and was a defect in some pumps.
 
Brent makes a good point. I heard of a track loader that hit a natural gas line; the operator cut the engine and jumped and ran, but the tractor kept running on the gas.
 
Just out of High school, living in Oklahoma, I got a job as a roughneck on a schramm air rig used to dig shallow oil wells(1980's)

The first well I was on we hit a gusher, oil blew for days before we got it shut down. As soon as we hit it, the driller instructed us that if he yelled to run, we best run as it was possible for the air intake to suck in the natural gas and run away.

The rig had a v12 detroit. The other thing I remember is that once a day, we would take a case of oil and start pouring it in the engine till he told us to stop. We stopped when the oil pressure got back to where it belonged. That thing ran full boar 24 hrs a day and was thirsty.
 
Back
Top