PTO Drop Cord

B

BIGHOSS

501 Club
This could possibly be the Cub tip of the week, maybe tip of year. :D :D :D

The hardest part of sliding the pto shaft back in place, while aligning the shifter rod is shining a flashlight down in the fill hole and trying to look around the flashlight.

I made up a miniture drop cord using a mini light bulb. The bulb can be lowered down in the hole leaving only two small wires visible in the hole. The little 12 volt bulb illuminates all of the inside of the pto cavity. You can then see the end of both shafts, collar and the shifter lever all at the same time. What was taking me sometimes hours to install the shaft, now a very few minutes.
DropCord2.jpg
 
DON'T LET RICK SEE THAT OR HE WILL BE MAKING THEM TO SALE ON KUBKRAFT
SO YOU BETTER GET A PATTEN ON IT :bellylaugh: :bellylaugh:
THAT SHOULD BE A GREAT LITTLE TOOL TO HAVE

48 BARNEY :tractor: :wave: :tractor:
 
BIGHOSS":1s9xljqd said:
Dang! We southern boys are too slow.
Click to expand...

I think you just got carpet-bagged :bellylaugh: :bellylaugh: :bellylaugh: :bellylaugh: :applause: :applause:

Good one , Rick....
 
All kidding aside, I think it is a great idea and it sure beats trying to hold a flashlight in your mouth to see what you are doing.

Whatever you do, don't show this to my wife......... She will be sticking that dang thing in my ear to look for P.S.I.
possible signs of intelligence :lol:
 
I realize this thread is three years old, but after reading a few new posts about pto repairs lately, I thought it would be a good time to bring this one back for some of the new guys who may be interested. I thought it was a great tip when Ron first posted it and I still believe many of the folks here would benefit from his idea.
 
I told you that you guys are funny. And yes between the flash light the heat and humidity the sweat the empty stomach and the failed fix there were a few tears.
 
I used the cord at the "Bash" to install the pto into SteveH and his dad's new transmission. Sure makes it easy to see what you are doing. I will try to remember to bring it to the "Tug".

By the way, my brother Roger, Steve Koons and I plan to be at the Tug Thurs afternoon. We need to find Steve something else to do. All he wants to do now is straighten cub carbs. :lol: :lol: :lol:
 
Ron - It looks like Thursday is going to be a busy day at the tug! I'm sure we can find something for Steve to do! :lol: :lol:
 
BIGHOSS":m2lgohf6 said:
I used the cord at the "Bash" to install the pto into SteveH and his dad's new transmission. Sure makes it easy to see what you are doing. I will try to remember to bring it to the "Tug".

By the way, my brother Roger, Steve Koons and I plan to be at the Tug Thurs afternoon. We need to find Steve something else to do. All he wants to do now is straighten cub carbs. :lol: :lol: :lol:
Click to expand...

Gonna be fun seeing you guys again. Sorry Roger missed the Bash. But on the bright side, Mr. Steve and I became very good buddies. Looking forward to the Tug!! :{_}: :{_}:
 
BIGHOSS":21hyv3yl said:
We need to find Steve something else to do. All he wants to do now is straighten cub carbs.
Click to expand...
Maybe Darrell will need him to hold a flashlight while he rewires the barn. :lol: Say, where's that picture Dale took. You know the one, where there was a gigantic flash just as I stuck my hand in the electric panel. :shock:
 
You must log in or register to reply here.
Back
Top