project I've been working on for a long time

Keith L

Well-known member
Did you ever notice that the piston bore of a Cub is the same size as a Bud can? I have been working on a viable beer mug using one bore of a Cub engine. It's not easy because of the weight.
normal_110_1033.JPG
 
Hey Keith,
i think you just might be on to something there! You could advertise the mug to not only hold a cold one but also to build strong arms and burn off the brew calories with every sip! :lol:
 
Boy your not kidding! I have been cutting away the extra castings and was going to inset valves to use as a handle, but it is still way heavy.
 
So, you're reclining in your favorite Barcalounger this afternoon watching your favorite pro football team with a can of your favorite adult beverage (MGD) proudly displayed in your favorite Rube Goldberg cast iron, windproof, cyclone proof can holder on the table next to you. Your favorite team wins in the last second, you leap to your feet with joy promptly scaring beejeezes out of the family dog who's been recling at your feet - the dog jumps up and knocks the can + holder off the table landing on your foot breaking 3 toes, soiling the carpet, and taking the joy out of said victory. I'm thinking your time would be better spent seeking Nichole's killer or a cure for the common cold.......but that's just me. Craig
 
Here's one I made a couple years back. There's a junk 50 Chevy back in the woods where we ride our Honda 3 wheelers. And the Chevy was a required stopping place for a beverage. Once the sheetmetal was almost gone, you could get to the frame pretty easy. So, I cut a piece of the torque tube to make the mug, the handle is the e brake handle and the data plate from the firewall is epoxied to the mug. This one is pretty heavy too.
normal_110_1042.JPG
 
Seems to me, you are going to a lot of trouble to make enjoying a cold beverage, a lot of work. If you are not ambidextrous you could end up with one arm bigger than the other :lol:
 
When you get older you will have to learn how to drink with a straw. You won't be able to pick the darn thing up. :lol: :lol:
 
Kieth:

From a fabricator/craftsman/artistic type, I can see the why, the what and the how. What intrigues me the most is the why.. on so many different planes this is interesting.

Simply.... just cause you want to see if you can do it. It also may provide relaxation, I know obsessing over a "silly to others" project is definitely relaxing and a heck of a lot of fun.

The fact that it may not be a consumer item is besides the point.. I like the creativity.

I have been working on making a fully functional retractable coffee cup holder from old CD Rom Drives...

Is it useful? Nope, is it commercially viable ? Nope.. is it a lot of fun.. YUP ! sure it.. :big smile:

Keep on playing Keith, it is what keeps us young :!:
 
Wow, an extremely unique and one of a kind item that should bring big bucks on ePay (mispell intended). Good thinking!
 
A little more to the reason of the Chevy mug. One of my buddies that was always on the 3 wheeler trips and the required stop at the Chevy lived halfway between the ends of the trail. Well the Z man decided that the 30 paks were costing him too much so he decided to get a keg cooler for the cabin. One of my other buddies made a mug out of a cow horn with a deer antler handle to be left at Z's cabin for beverages. So of course I had to come up with something at least as good as that, so the Chevy mug was to commemorate one of the stopping places. The Cub engine bore mug was born of too many beverages.
 
Back
Top