Preparing for Shipping

Dan England

501 Club
I have a left final drive about ready to pack for shipping. I need advice on how to box the item so that it withstands the rigors of rough handling. I am concerned about the weight, the shape (doesn't fit nicely in a square box) and especially how to prevent the differential shaft from punctuing the box during transport. All advice appreciated. Dan
 
Dan,

Tape an old tennis ball with a hole cut in it over the end of the shaft. Reinforce the side of the box that the shaft points to with additional pieces of cardboard. Then, lots of bubble wrap and styrofoam peanuts.
 
Made sure that it will not leak oil. I sold a old oil can on ebay, it have a little oil that I could not get out. It started leaking the post office called and said it was leaking and they were holding it. I said I will drive down to pick it up, they said no and throw it out.

I don't know if this applys to you. I don't think they will throw out a big box they that. But it mine get some place and start leaking and they could hold it.

I learn my lesson and that I also warn other people about it.

Kyle
 
Dan,
Buy a can or two of "Great Stuff" foam insulation at Lowe's or Home Depot.
Once you have the drive positioned in the box (inside a plastic bag) fill around with the spray foam.
Peter
 
Peter: "Great Stuff" is a new-to-me product. Is is similar to expanding foam sometimes used when insulating cracks around door or window facings? Sounds great and I will give it a try. I assume that it becomes fairly firm to prevent the drive from shifting position within the package? Dan
 
Dan, Great Stuff is a brand of the foaming insulation. You have to be careful, in that it expands to the point it can distort a wall, so it needs to be used carefully. They also make a version of it that has limited expansion for use around doors and windows.
 
Next question. If I don't find "Great Stuff" in our local stores should expanding foam of other brands work equally well or does Great Stuff have desirable characteristics not found in others? I would think that other brands might work well also. Dan
 
Thanks, Peter. I will make a trip to Wal-Mart tomorrow. If they don't have it my wife can check at Lowes in Texarkana on Monday. Dan
 
I took Peter's advice and used a can of Great Stuff in packing the final drive. The buyer reported that the heavy package arrived in good shape so I will be using expandable foam whenever I ship heavy, bulky, hard-to-package items in the future. Dan
 
Hey guys, this great stuff works well for a lot of things. If I was shipping something I'd wrap it well in plastic before using the foam because it's a nightmare to get off of everything it touchs....
Also us all of the can because once it's opened there's no saving any that's left in the can, so have a crack in the garage or somewhere to put the extra... Yogie
 
Yogie made an excellent suggestion about enclosing the item being shipped in plastic. I did enclose mine so the foam could not come in contact with the final drive. Dan
 
Yogie":21rar32v said:
Hey guys, this great stuff works well for a lot of things. If I was shipping something I'd wrap it well in plastic before using the foam because it's a nightmare to get off of everything it touchs....
Also us all of the can because once it's opened there's no saving any that's left in the can, so have a crack in the garage or somewhere to put the extra... Yogie

Peter Person":21rar32v said:
Dan,
Buy a can or two of "Great Stuff" foam insulation at Lowe's or Home Depot.
Once you have the drive positioned in the box (inside a plastic bag) fill around with the spray foam.
Peter
:big smile:
 
Peter:

Would you be so kind sir as to compose complete with pics of said process a How To Properly Package Parts For Shipment - Part A "Castings" :?: This could be a goodie... along with some of the other tips, this is good stuff.. Remember many are visual learners :!: :shock: :? :big smile:
 
Rudi,
I've actually never shipped anything using this method however I have received items packaged this way so I know it works and that's where the idea came from.
Peter
 
You are right, Rudi. Both Peter and Yogie advised the use of plastic wrapping but I mentioned only Yogie. No slight intended, Peter, just a senior moment, I guess. It was your suggestion which caused me to wrap the final drive in plastic. Dan
 
I have used this method. There is a trick to the plastic and foam if you want to make it easy for the person to get the part out of the box. I will try to take some pictures and put a how-to up here.
 
Back
Top