ABOUT - approximate. I used 30 psi since it is close to the center of the desired range. 15 psi is a guess based upon a bunch of assumptions/unknowns. A number of factors will effect the dynamic reading such as pipe diameter, pipe material, number of elbows, restrictions, hot or cold water.John(videodoc)":2hzzxuvd said:okay so the PSI or static pressure is 30, thus making it dynamically 15?
John(videodoc)":3qywwswm said:meter is out by the road. but if i had a serious leak that would show up in monthly bill. it averages about 40-50 for the 4 of us.
Mike in Louisiana":jr5c712e said:John(videodoc)":jr5c712e said:meter is out by the road. but if i had a serious leak that would show up in monthly bill. it averages about 40-50 for the 4 of us.
Does that water bill include sewer and garbage collection?
Lurker Carl":16zr1izo said:Look at the water volume used each month, not how much money you're spending. Each water works charges surprisingly different rates.
The biggest difference is the age of that system. My water and sewer lines have been in place for almost 100 years - we are long overdue for replacement and upgrades. We have several BIG water main breaks each year along with hundreds of minor ones, this is one was last summer.Bigdog":25d16p73 said:Those of us on rural water systems usually pay significantly higer rates than those on urban systems. I guess we are just used to it. We now have a sewage system in place and our water and sewage costs for just two of us are around $70 a month here.