Picking Diesel Generator Engine

2cubs2cases

Well-known member
I am interested in building a generator to provide electricity for my house. You may have heard of diesel engines that burn waste vegetable oil and waste motor oil.
From what I can tell indirect injected diesel engines are best for this. Since this is a budget project I have run across the following engines which fit.
Mercedes OM636 reefer engine, Isuzu c201 reefer engine, Lister slow speed engine made in India. Kubota reefer idi engine, Yanmar reefer idi engine, Detroit diesel 2-71 or 3-71 idi engine.
I want to use a 12kw 1800rpm generator.
I called a local truck scrap yard and was told running engines with hour meters $500 and those not running but complete $200. They had the Isuzu and Kubota engines.
Anybody have experience with this?
 
Cowboy has done some research on this and has a Lister powered unit. Unfortunately he has been real busy lately and doesn't get much time to visit the board. Maybe he'll see this and comment.
 
A lot of noise has been made over the waste french fry oil recently. IMHO, I'd compare it to the fermented goat poop craze of a few years ago. The theory is sound but the economics aren't. I wouldn't even consider climbing aboard the bandwagon for a fuel source that couldn't supply even a tiny fractional percentage of the need. Even if it could be done with no investment at all!
 
I am told that if you get an older diesel- specifically one with mechanical injection you can start it on diesel, then switch it to heated, strained, un-refined vegetable oil. ?????? Try a Google on - Cummins 4BT forums, the have a section on alternative fuels. Frank
 
junkman1946":24p93j48 said:
I am told that if you get an older diesel- specifically one with mechanical injection you can start it on diesel, then switch it to heated, strained, un-refined vegetable oil. ?????? Try a Google on - Cummins 4BT forums, the have a section on alternative fuels. Frank

These engine seem to start around $2500. More than I want to spend. Thank you
 
George Willer said:
A lot of noise has been made over the waste french fry oil recently. IMHO, I'd compare it to the fermented goat poop craze of a few years ago. The theory is sound but the economics aren't. I wouldn't even consider climbing aboard the bandwagon for a fuel source that couldn't supply even a tiny fractional percentage of the need. Even if it could be done with no investment at all![/quote

Not sure how this answers my question about what engine to choose.
 
Bigdog":mtev8jcx said:
Cowboy has done some research on this and has a Lister powered unit. Unfortunately he has been real busy lately and doesn't get much time to visit the board. Maybe he'll see this and comment.

Thank you. Maybe he will post some information.
 
I don't know if using a generator set for 100% of your electricity is economically viable.

I have two generator sets. One used at the shop on an acreage and the second currently located in son's garage.

The set at the acreage is used to power a few electric lights, battery chargers and occasionally power tools. Reason for this set is that I only use electricty occassionaly and it's cheaper to buy a few gallons of gasoline every month or so than the $18.?? a month just to have electricty at the shop/acreage. This set is not portable.

Second set is portable and hauled to various construction/job sites. Also used during power outages to keep a house operating. This set was used 9 days continuously last winter. This 4KW set cost $200-.
 
2cubs2cases":2rwbj5jg said:
Bigdog":2rwbj5jg said:
Cowboy has done some research on this and has a Lister powered unit. Unfortunately he has been real busy lately and doesn't get much time to visit the board. Maybe he'll see this and comment.

Thank you. Maybe he will post some information.
I believe he stated the Lister units are no longer available in US. I assume due to air pollution requirements.
 
2cubs2cases":3gxy540t said:
Not sure how this answers my question about what engine to choose.

Well, OK I'll say the little Mercedes refer engine is a pretty good little unit provided you find one that isn't completely worn out. Since you aren't concerned about the cost of setting up for a fuel that won't have a reliable source in any qualtity why not get one and rebuild it? After all it's your money. Be forewarned they are very different from the auto engine... they are even built left handed and share no common parts. I have owned and rebuilt a few Mercedes engines. :D
 
George Willer":39h642uc said:
2cubs2cases":39h642uc said:
Not sure how this answers my question about what engine to choose.

Well, OK I'll say the little Mercedes refer engine is a pretty good little unit provided you find one that isn't completely worn out. Since you aren't concerned about the cost of setting up for a fuel that won't have a reliable source in any qualtity why not get one and rebuild it? After all it's your money. Be forewarned they are very different from the auto engine... they are even built left handed and share no common parts. I have owned and rebuilt a few Mercedes engines. :D

Thank you will look for one. Used motor oil is available for free in this area.
 
All types of used oil USED to be available around here also. Until a few people started refining bio-diesel. With the increased demand for used oil. Some restauranters are now attempting to sell their used product. I saw a bio-diesel turnkey "refinery" in Northerntool for about $12000. You got to refine and use a lot of fuel to begin to recoup that investment. Frank
 
junkman1946":1i7yrfp3 said:
All types of used oil USED to be available around here also. Until a few people started refining bio-diesel. With the increased demand for used oil. Some restauranters are now attempting to sell their used product. I saw a bio-diesel turnkey "refinery" in Northerntool for about $12000. You got to refine and use a lot of fuel to begin to recoup that investment. Frank

There are quite a few low cost ways to refine oil. Lot of information out there.
 
Eugene":1h5rymr8 said:
I don't know if using a generator set for 100% of your electricity is economically viable.

I have two generator sets. One used at the shop on an acreage and the second currently located in son's garage.

The set at the acreage is used to power a few electric lights, battery chargers and occasionally power tools. Reason for this set is that I only use electricty occassionaly and it's cheaper to buy a few gallons of gasoline every month or so than the $18.?? a month just to have electricty at the shop/acreage. This set is not portable.

Second set is portable and hauled to various construction/job sites. Also used during power outages to keep a house operating. This set was used 9 days continuously last winter. This 4KW set cost $200-.

Thank you have to agree with you there.

It might be better to have a backup.
 
John *.?-!.* cub owner":10bwffuf said:
2cubs2cases":10bwffuf said:
Bigdog":10bwffuf said:
Cowboy has done some research on this and has a Lister powered unit. Unfortunately he has been real busy lately and doesn't get much time to visit the board. Maybe he'll see this and comment.

Thank you. Maybe he will post some information.
I believe he stated the Lister units are no longer available in US. I assume due to air pollution requirements.

I understand you can only buy the engines as kit engines. Buy a short block from one supplier and then buy the top end from another supplier. You are responsible for putting it together and running it. This way they can still legally be sold as parts engines.
 
Hi 2c2c

It is my understanding that you can buy any lister diesel that is already in the US. But they cannot be imported anymore becouse there are no emmission controles on it.

You can get it in direct injection and inderect injection (if you can find one) The inderect injection is to one you would want. It can burn diesel, bio-diesel, strait vegtable oil or used engine oil (if filtered) If used engine oil is used it is my understanding the injector will coke up and will have to be pulled out and wirebrushed every mont or two on 24-7 continous running. It is also my understanding that strait veg oil and used motor oil need to be heated before it is run into the engine to thin it out.

This is a link to what I have done so far

http://farmallcub.com/phpBB2/viewtopic. ... ght=lister

Good luck

Billy
 
Back
Top