Physics.....

spiveyman

501 Club
Ok guys - I feel really stupid asking this of you, but i have no where else to turn. My friend and I missed a phyics class because of a field trip we both went on, and then and unexpected death ....( long story, and we always do hw together).

Dad is out of of the country, so he cant help, momma has no clue, can't get in touch with the teacher, do not know anyone in the class, yada yada yada.....

I have one answer (back of the book) to a problems, but I can't figure out how to get there. The chapter in the book/notes are no help either....SO if any of you are skilled in the sciences and wouldnt mind helping these two little pathetic souls, I'd much appreciate it! I'd just like some advice on which formulas work and how to do this. This new material I should add- I missed the start of chapter 6 and Im just plain lost!

Problem #1

When you push a 1.80-kg book resting on a tabletop, it takes 2.35 N to start the book sliding. Once it is sliding, however, it takes only 1.50 N to keep the book movingwith constant speed. What are the coefficients of static and kinetic friction between the book and the tabletop?

This problem is even in the book, so i dont have an answer in the back to go from...


Problem #2

To move a large crate across a rough floor, you push on it with a force F at an angle of 21 degrees below the horizontal, as shown in the figure below. Find the force necessary to start the crate moving, given that the mass of the crate is 32 kg and the coefficient of static friction between the crate and the floor is 0.57.

The answer is supposedly 0.25 kN, probably more "friendly" when written as 250 N. Again, I can't figure how to get to that answer. Here's the picture for it:

P1010096.jpg





I have a bunch of work to do this week to catch up from my trip, and this is just holding me up. THis class is hard, so i need to turn in the homework-itll help keep my grade up. I would appreciate any help you guys can offer me!!! sorry to bug you but I have no where else to go :cry:
 
Andrew:

It has been over 35 years since I even had to think about the Coefficients of Friction .. either in Imperial or Metric... so I have no clue anymore as to how that works. Maybe I can ask one of my daughters to help with this.... will see how much time they have tonight..

Anyways, plugged Coefficients of Friction into Google and poof.. Coefficients of Friction at Physlink.com - looks like an interesting site.

There may be some help available there?
 
Rudi,

That site is much better than the ones I had been searching....It's a start, but I aint done yet. I'm doing more searches as we speak. THANK YOU! and glad to see you'r eback online! I'll try to talk with you later!
 
Andrew, the answer to #2 is pretty simple:

Throw a chain around the crate and hitch it to your Cub. Then the answer becomes "One Cub in second gear." No professor can find fault with that. :lol: :lol:

Seriously, it has been more years than Rudi since I worked with such equations. Sorry I couldn't be or more assistance.
 
Come on guys, the young man is asking for some help, not a bunch of smart a$$ remarks. I'm sure there is someone on this forum that can help him, and if you can, please do so. If you can't, he doesn't need your weak attempts at humor.
 
I am a little rusty, but I think this is it........ tell me if it makes sense...

Formula for Static Friction

FS = μs * N

Static Coefficient of Friction - μs
Force required to start movement - FS
Normal Force - N (gravity)

Formula for Kenetic Force

FK = μk * N

Kenetic Coefficient of Friction - μk
Force required to maintain constant velocity - Fk
Normal Force - N (gravity)

For Problem #1

μs = 2.35 N / 1.8 N = 1.31
μk = 1.5 N / 1.8 N = 0.833
 
oh, and for the second problem you have to break the pushing force into X and Y (Normal). The Y component would add to the weight of the box and the X component would be the force that moves the box along the floor.
 
Ah, CRAP! I forgot about gravity...


Coefficient is ratio of force resisting motion to the normal force (=weight on a level push).
Weight = mass X gravitational acceleration = 1.80 X 9.8 = 17.64 N
Static coefficient = 2.35 / 17.64 = 0.13
Kinetic coefficient = 1.5 / 17.64 = 0.08


Second one is a bit trickier.

In this case the normal force (32 X 9.8 X 0.57) = 180 N

However there is another component acting downward = F sin21.

Total horizontal force required is therefore

F.sin21 x 0.57 + 180

Total horizontal force is also = F.cos21 so we can say

F.cos21 = F.sin21 x 0.57 + 180 N

Which can be reduced to

cos21 = 0.57sin21 + 180/F

0.93 = 0.20 + 180/F

0.93 - 0.20 = 180/F

0.73 = 180/F

F = 180 /0.73 = 250 N


THIS Should be the right answer!
 
Camo - Dude you are amazing! Yes that is the EXACT STUFF in my book that i pondered for about three hours....I quit for the time being and started on the five other thigns i had to do!! All you other guys, I really appreciate the support :D . I can find the forumulas, but i had so much trouble just working it all out - I just dont know how to explain it. Camo, many many thanks dude. I might be coming back to you when i need help and dad is out of town..... 8) It's getting late and I still needed to do a few things, but Iguess they'll have to wait. My friend and I are going to meet super early tomorrow morning to run back over this and make sure we get it. I really do appreciate everyone!!!!!! Goodnite fellas
 
Jim Becker":1ana0e8y said:
Scotty D":1ana0e8y said:
all that crazy stuff makes me glad i didnt take it
WHAT? You didn't take physics? You need to remedy that oversight.

Physics, chemistry, geometry, and trig are often passed over by students who don't ever plan to understand the world around them. :( :( :(
 
I took algraba I then algraba II without taking geomonerty in between so I could not do A II. So I dropped it and took drafting. Which is a good class because you can lay out your ideas and get everything to fit before you build it. I took physics never did any home work because I couldn't do the math. Passed with a D though because I made some awesome projects. I can't figure out things by doing math but I shure can build. I really do wish I knew all that math now shure would make my projects easier and better built. Not to mention cheaper and faster. As then I would only have to buy what I needed. Rather than build something cut it apart change it and try it again.

Camo now you are on my LIST of people to call when I have a problem :wink:

Billy
 
Now all you guys wondered how Ralph was able to take a cub apart in such short order......now we all know it was really Camo all the time!!! 8)
Cat's out of the bag now Ralph :oops:
 
Jim Becker":31cstgwb said:
Scotty D":31cstgwb said:
all that crazy stuff makes me glad i didnt take it
WHAT? You didn't take physics? You need to remedy that oversight.

I agree with Jim and George, you should take physics. You dont want to back yourself into a corner with your future. I am taking Residential Construction now in college, next year I will have to take physics again. I know I will be glad I took it in high school. :wink:
 
Nik - I respect you for decision to take the class again... I gotta tell ya though, If i EVER get out of this class, i wouldnt touch another physics class with a ten foot pole! School is important, science is important, but there are other sciences out there. I'd have to really think baout taking another one....

I did learn a weeee little bit more in class and lab today, but It's going to be a long road. My school has decided to start a math/ sci program to help those of us in the math/ sci courses. My old bio/ chem teacher will be working with me once a week, so hopefully that'll do me some good. :roll:
 
Back
Top