Parts Washer Solvent

Eugene

501 Club
What are you using for solvent in your parts washer?

Son purchased a parts washer at auction. Commercially available solvent appears to be expensive.

Thinking about using kerosene or diesel fuel.
 
I was going to go with either Kerosene or Mineral Spirits, but to stay "green" I decided to use Purple Power. Purchased from Parts store in 5 gallon cans. They recommended cutting it 2 parts water to 1 part PP. I think mine is a bit stronger than that. Works pretty good.
 
I primarily use the Tractor supply PSC 1000 solvent, however as has been mentioned, it ain't cheap.
http://www.tractorsupply.com/crown-reg- ... l--3893915
If the level gets a little low and I have some kerosene or diesel fuel on hand I will add it to top off. The PSC 1000 does clean better though, and is a little less flammable. I put a small petcock in the side of mine near the bottom and when the solvent gets pretty dirty I drain it into a can running it through a paint or coffee filter, then clean the washer and refill with original solvent, plus topping off.
 
Mr E":crpji8ru said:
I was going to go with either Kerosene or Mineral Spirits, but to stay "green" I decided to use Purple Power. Purchased from Parts store in 5 gallon cans. They recommended cutting it 2 parts water to 1 part PP. I think mine is a bit stronger than that. Works pretty good.

I like that idea except I live in Michigan and my shop is not heated all winter, therefore I need something that won't freeze in my tank. If not for that, that is what I'd do when I need to change my fluid. I'm currently using a Stoddard solvent.
 
While it's still not cheap, I buy paint thinner from Lowe's in 5 gal. cans. It works well and costs a little less than stoddard.
 
Biodiesel (B100) is a solvent and works well as a cleaner (including the fuel system, which can be bad). Has a flash point similar to diesel, smells like fried clams and is pretty reasonable around here. It does turn to pudding below freezing.

But, not sure how it would work in a parts washer.... Possibly worth doing a search on??
 
I use mineral spirits in mine. If you get the low odor kind it makes for a much better cleaning experience. I agree it's getting expensive. I like to use lacquer thinner in a small bowl with a brush if I don't want any oily residue, but have you priced a gallon of thinner lately?
Things just keep getting going up!!
Roy
 
I use 3 gal kerosene and 1 qrt atf it was a recipe I got from an old mechanic. it doesn't have to be exact, then I just top off with what ever is on hand. works good for me. :)
 
Back
Top