Part Number for Mott Flail Mower Knives

B

Bigschuss

Well-known member
Hey guys…I decided to replace all of the knives on my flail mower this year and called Flail Master to place the order. I have all of my receipts of old purchases going back to 1999 from 3 different companies and the part number for the knife was always 101031. I placed the order and thought all was well…then about 4 days later I got a call from Flail Master saying that 101031 was an obsolete part number.

Any help with a part number? I know John *.?-!.* CubOwner replaced his knives last summer. I'm hoping somebody can give me a tip on a good supplier and a part number.

Thanks in advance.

Blair
 
buy the wider blades from flailmaster, I think they are 1 1/4" wide, they fit right on in place of the 3/4" wide ones that were stock
Tim
 
Eugene":32vjfr9i said:
http://flailmaster.com/our-products/

Near bottom of page, you can down load Flailmaster's catalog.
Click to expand...
And if you do, you can find this entry for their # MH-386. The same page has pins and cotter pins.
Fine-Cut Blade
(102086/02988196)
Pin Mounted
.087” Thick
1 1/4” Wide
4.7” Tall
3/8” Mtg. hole
Qty. 1 to 249.................$0.62 ea
Qty. 250 to 499.............$0.56 ea
Qty. of 500 or more......$0.54 ea
Click to expand...
 
Jim and Eugene gave you the correct information the 101031 blade was both narrower and thinner, and if in fine grass gave a slightly smoother cut, but only nominally so. The 102086 is both wider and thicker, and lasts longer, especially for rough work. I quit using the thinner blades when the thicker ones became available several years ago.
 
You must log in or register to reply here.
Back
Top