Packard Motor Car Company

bigbert

Active member
I know this is way off the subject of the farmall cub, but does anyone know when Packard closed there doors. Thanks for the info, ok back to the cub! :{_}:
 
Studebaker took them over in 1957 and discontinued the name in 1959.

Edit: Can't beat the Bigdog, and yes, Wikipedia does have a lot about the subject.
 
Packard and Stude actually merged in 1954. Not sure who bought whom, but they were the same company by that point, still producing their own cars. The last of the breed were in 1956. In 1957, they became Packabakers, and the brand lost its identity.

I would love to ride in a classic Packard some day...

Mike in La Crosse, WI
 
Ah the Packard plant... one of the "Faublous Ruins of Detroit"... just a short trip down I-94 from my house. :)

packard-plant.jpg
 
For years, the Packard advertising slogan was : "Ask the man who owns one". I have ridden in a Packard but never drove one. Packard made aircraft engines during WWII.
 
Hey, Guys:

Some of you know that my dad was an IH dealer. I've never mentioned it on the forum, but he also had the Packard contract from 1946 to 1953. My first car was a well-traveled 1952 Packard 250 with stick shift and overdrive. I know for a fact it would run 70 mph in second gear/OD. The belts shrieked a little, but that long-stroke flathead eight would wind forever.

I started restoring, collecting, and playing with Packards again in 1974, have owned several and still own a couple. Bus Driver, if you ever get up to Indiana I can arrange for you to drive one. They were great cars in their day, and the survivors still are.

Steve H.
 
I saw this beauty last year on the way back from the family vacation in Nashville. We stopped at this car show in I believe it was Hodgenville, Kentucky on our way to Frankfort. They closed the town square for the car show. This was the same day as the CubTug last year.

The back seat in the Patrician was as big as a living room couch.

Doug

55Packard1.jpg

55Packard2.jpg
 
I just spent the last week in Detroit, checking out the Ford Buildings. Aftermac, I figured there were some Cub owners near by, but with the inlaws along and our very tight schedule I had no cub time. I did see one sitting in large, well cultivated garden right along I-94 near Ann Arbor. It was in its work clothes and had some sort of spray attached.
I am into Model T's and that is the only Fords I own. So we visited the Piquette Ave Plant, The Roughe, The Henry Ford and Greenfield village. The Packard plant wasn't on my list and I didn't know it was still standing. The Packard plant was designed by Albet Kahn, who just finished it in 1910 or 1911 and was immediately hired by Henry Ford to build his 'Crystal Palace' at Highland Park. Highland park mainly built Model T's and is in the same shape of disrepair as the Packard Plant. Piquette is were Henry Ford designed the Model T and built them until He opened Highland Park. I'll quit know as you can tell I enjoy Model T Ford history and could go on, until you are all sleeping.
 
OK, can't resist. Here are a couple of pictures of my "baby." It's a 1953 Packard Patrician that I've owned since 1985.

1953 Packard Patrician 008 (Small).jpg

1953 Packard Patrician 013 (Small).jpg


Steve H.
 
Aftermac, the Packard Club guys have spent a lot of time salvaging items of historic value from that old Packard plant. They are also restoring part of the old Packard Proving Grounds at Utica, MI, so a lot of what they have salvaged is going out there for display.

It is a shame that the old factory has fallen into such disrepair. Last I heard, there was talk of razing it completely.

I tried to post pictures the size of yours, but the site rejected them as too large. How did you do that???


Steve H.
 
Steve:

Resize the jpeg with either Windows Picture resizer if you have Windows XP , or IrfanView which is a really neat program. Resize them to around 200 x 200 pixels .. I think that would be about right and around 50 kbs or something like for size and it should upload. It has been months since I have used the attachment option, it is not as useful as the Photohost which is really the better option.

This might be of some help...

 
If anyone is heading near Dayton at any time and is interested in Packard's, might want to make plans and divert this way to visit the Packard Museum here.

http://www.americaspackardmuseum.org/the_museum.html

Can't remember how many cars are there, I know they have one that belonged to the mobster Al Capone.

Pretty neat place, took my wife's Great Uncle a few years back to see the cars (he's 97 now) and just so happens the guy running the museum that day (it is all ran by volunteers) had a mutual friend and before you knew it, he pulled one of the Packard's out and took my wife & her uncle for a ride around town. I ended up staying behind and minding the museum.....I actually had 3 customers while they were gone and was actually able to give them a little history. You know what they say, if you can't win them over with your good looks, try baffling them with :censored: :censored:
 
farmallcub49":2g176vf6 said:
I just spent the last week in Detroit, checking out the Ford Buildings. Aftermac, I figured there were some Cub owners near by, but with the inlaws along and our very tight schedule I had no cub time. I did see one sitting in large, well cultivated garden right along I-94 near Ann Arbor. It was in its work clothes and had some sort of spray attached.
I am into Model T's and that is the only Fords I own. So we visited the Piquette Ave Plant, The Roughe, The Henry Ford and Greenfield village. The Packard plant wasn't on my list and I didn't know it was still standing. The Packard plant was designed by Albet Kahn, who just finished it in 1910 or 1911 and was immediately hired by Henry Ford to build his 'Crystal Palace' at Highland Park. Highland park mainly built Model T's and is in the same shape of disrepair as the Packard Plant. Piquette is were Henry Ford designed the Model T and built them until He opened Highland Park. I'll quit know as you can tell I enjoy Model T Ford history and could go on, until you are all sleeping.

I'm about a mile (as the bird... er... airplane flys) from Metro Airport... basically at 1-94 and I-275. There are at least two other Cubs nearby. One just randomly drives through my neighborhood a couple times a year. The other one pulls a vegetable stand at a house just outside of my sub-division.

As a general rule of thumb, if it's in Detroit, it's probably still standing... ok, it's not quite that bad, but it's real close. It's sad how much of Detroit is in disrepair. There is more vacant land in Detroit, than the size of the entire city of Boston. If you are interested in seeing more of abandoned Detroit, check out this site: http://detroityes.com/home.htm

It's a bit tricky to navigate, but there's a lot of information and pictures. Use the "Begin Tour", "Express", and "Detour" buttons to get around.

The city started demolishing the Packard Plant in 2002, but received a court order to stop. Most of the plant is still standing. The Studebaker plant burned to the ground in 2005.

It's been a long time since I've been to Greenfield Village... about 16 years. Sad since it's about a 15 minute drive to get there. :) I've been to the Henry Ford Museum and the Ford Rouge Plant in the last couple years. I definitely recommend these to everyone that has a chance to visit Detroit. Greenfield Village and the Henry Ford Museum, ARE the greatest American history attractions in the country.

My wife's uncle has a Model T, but it's in pieces. He's been "restoring" it for the last 15 years. :) My grandpa has a 1935 Ford, the body is still decent, but we don't know about the frame and undercarriage. Thus far, he has refused to let anyone remove it from his shed with a dirt floor. :cry:

Steve.43":2g176vf6 said:
Aftermac, the Packard Club guys have spent a lot of time salvaging items of historic value from that old Packard plant. They are also restoring part of the old Packard Proving Grounds at Utica, MI, so a lot of what they have salvaged is going out there for display.

It is a shame that the old factory has fallen into such disrepair. Last I heard, there was talk of razing it completely.

I tried to post pictures the size of yours, but the site rejected them as too large. How did you do that???

Steve H.

I'm glad there are groups out there that are preserving these historical items. Detroit just seems to let them go back to nature.

Like I mentioned above, there is still "talk" of razing the plant and they actually started to do so in 2002, but it is held up in court. If anyone wants to see the building in person, I wouldn't recommend waiting too long... it will happen eventually.

As far as the picture, I didn't actually "upload" it to the website. I did a Google search for the picture and copied it's URL. Then I pasted it in my post and put "IMG" tags around it. In the Full Editor you can click the "Img" button above the text box that you type in and it will create the IMG tags for you. Then post a link to pictures anywhere (with a few exceptions) on the Internet. Here is the actual code I used:

Code:
[img]http://image.motortrend.com/f/miscellaneous/can-the-packard-plant-be-saved/9705370+w527+st0/packard-plant.jpg[/img]

For posting my own pictures, I use PhotoHost or Picasa to upload them to, and post them to the forum the same way as above.

Hope that helps!
 
I have a new appreciation for Packards after I stumbled into a few in Maine the other weekend.... And I learned Dusenbergs were made in the USA. Funny that a MoTown native wouldn't know that! (this guy has 5 Dusenbergs and 3 engine displays....)

The Henry Ford Museum isn't as packed with stuff as it was when I was a kid, I was disappointed that no tractors were displayed, where I remembered a bunch before.

This is my favorite Packard... but they were all pretty special.
DSCN5750Small.jpg


DSCN5753Small.jpg
 
Brent:

There was a plan proposed that would have combined Packard, Hudson, Kaiser, and Studebaker. The corporation was to have been named American Motors. Packard would have been the luxury car, Studebaker would have been in the low-priced field, and Hudson and Kaiser the mid-range. When the plan fell through, Packard merged with Studebaker and Hudson and Kaiser merged to form American Motors.

Had they all merged into one, who knows? American Motors might eventually have been competitive with the Big Three.

Steve H.
 
Rambler and Studebaker merged with American Motors a bit later on.. and we got neat things like the AMC Hornet :roll: :D Personally I liked the Studs.. I had a 1950 Stud half ton as my very first vehicle.. a project truck. I loved the lines of it. Would have been nice to hear it run, but I wasn't proficient enough in mechanics to accomplish that.. but I still have fond memories of that truck :!:
 
Back
Top