I have been going thru the extra parts I have and found the remains of a old wiring harness.What size wires should I plan to use when I replace the wires?I need to know what the correct routing of the wires is.I also will need to look into where to get some paint.I know this has been asked before.when i did a search,it said nothing found.Thank you for any help.I will have a lot more questions as i hopefully make progress.Rick
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Original wiring questions
- Thread starter cubby
- Start date
Rick,
Wiring harness is simple enough to make but if you are "restoring" the Original, I would get a new harness. I have had good luck with Porch Electric and they have a good quality one... http://www.porchelectric.com/index_files/Page3513.htm
Paint, get IH paint, my opinion, like oil, there are lots of opinions.
Good luck,
Wiring harness is simple enough to make but if you are "restoring" the Original, I would get a new harness. I have had good luck with Porch Electric and they have a good quality one... http://www.porchelectric.com/index_files/Page3513.htm
Paint, get IH paint, my opinion, like oil, there are lots of opinions.
Good luck,
Wiring diagrams, below.cubby":6yxw6biz said:I need to know what the correct routing of the wires is.
http://www.cubfaq.com/wiringdiagrams.html
Any place that mixes and sell automotive paint; car dealerships, auto body shops, auto parts stores. If you have a sample or the paint code, they can usually mix you up a batch. Some places will put the paint in spray cans.cubby":6yxw6biz said:I also will need to look into where to get some paint.