Old Steam Powered Machine Shop

Stanton

501 Club
I’m fortunate enough to have a TV with Wi-Fi, so can watch YouTube videos while I recuperate.

Over the last several months I’ve been watching David Richard’s Old Steam Powered Machine Shop. I’ve really enjoyed it because he’s so laid back and amateurish; a real person. Not one of these flamboyant kids who want their face in the camera 90% of the time. Lots of metal machining work and making parts.

Check him out. I started with his first video and have been moving up since. I’m ready for #49…
 
SamsFarm":2bz828d4 said:
The http://portersvillesteamshow.com has a steam powered machine shop on their club grounds.

My take is all the stuff is donated / on loan from the family of original owners.

Unlike a club that may only use their shop a few times a year, this guy has an automotive shop out front and his steam shop in the back where he is using the steam shop on a daily basis. Besides, he’s based all his machines on what you’d see in a 1925 steam shop. Impressive!
 
[youtube]9WXHNBMLZZM[/youtube]

Pretty nifty!

(Except for 15:50) leaving the chuck key in the lathe chuck is a big big big no no!

My teachers pounded that into our heads!
Now I am a like they were about it! :)
 
One thing that I would want to add to run off that line shaft if that shop was mine.

That is a generator, make some electricity while the fire is a burnin!

Ok, maybe 2 things.....

I dont know, did not see, but a air compressor too, if he did not already have one!
 
Went back and looked at that key in the chuck. Seeing how he’s a novice in making YouTube videos, it appears he set the key in the head, went to turn in the camera, then comes back to center up the piece. Don’t think I’ve seen him leave the key in the chuck since (he’s got a dedicated key holder next to the spindle/chuck).

As for having a compressor or generator, I would suspect he does next door in his machine shop. But he’s trying to recreate a 1925 steam shop and run everything off steam. Anything electric would kinda defeat that.

You and I can put anything in our shop we want…but that’s not what he’s trying to do. Hope everyone can enjoy it like I am.
:D
 
Stanton":1wrg8vdk said:
As for having a compressor or generator, I would suspect he does next door in his machine shop. But he’s trying to recreate a 1925 steam shop and run everything off steam. Anything electric would kinda defeat that.

I was implying that the air compressor and generator would be powered by the steam engine and the line shaft.

I think he has some electric lights in there, and I did see a electric bench grinder! ;)

Not trying to take away any of the steam powered machines.
 
SamsFarm":2uv000m7 said:
Stanton":2uv000m7 said:
As for having a compressor or generator, I would suspect he does next door in his machine shop. But he’s trying to recreate a 1925 steam shop and run everything off steam. Anything electric would kinda defeat that.

I was implying that the air compressor and generator would be powered by the steam engine and the line shaft.

I think he has some electric lights in there, and I did see a electric bench grinder! ;)

Not trying to take away any of the steam powered machines.

Oh, ok. You didn't make that clear from your earlier comments.

Anyway, I've really enjoyed watching him work and have picked up quite a few tips for machine work.

Have a great rest of your week, Sam. :hattip:
 
Back
Top