No, this doesn't have anything to do with a computer screen, I mean real wallpaper.
I have done some remodeling in a bathroom and now I need to replace a little bit of wallpaper. I have plenty left over from when the original was put on, but that was many years ago. This is pre-pasted wall paper. I am not having much luck making it stick. I suspect the problem is related to the age of the paper.
First I tried the usual of putting it in the tray. I probably had it in the tray a lot longer than the time required in the instructions, but we're not talking minutes. It didn't stick at all.
I then experimented with a couple small pieces (maybe 2" square). I gave one just a quick dunk and slapped it on the wall. The other, I thoroughly sprayed with a squirt bottle of water. Both seemed to stick adequately, with the dunked one doing a bit better.
Since I know I couldn't possibly do a "quick dunk" of a whole sheet, I tried the squirt bottle on a whole sheet. It didn't do much better than the first big sheet. It tried to stick a little but not well enough.
Anyone have any suggestions on how to stick this stuff to the wall? Any secrets to working with aged wallpaper? The total area involved is less than 20 square feet, so normally impractical solutions are perfectly acceptable in this situation. I could go get some wallpaper paste (I guess you can still buy it!) but I don't know if it will work over the stuff that is already on the wallpaper. By the way, I did paint a coating of wall sizing on beforehand. Although at this point, I probably need to put a new layer on the section where I have tried twice.
I have done some remodeling in a bathroom and now I need to replace a little bit of wallpaper. I have plenty left over from when the original was put on, but that was many years ago. This is pre-pasted wall paper. I am not having much luck making it stick. I suspect the problem is related to the age of the paper.
First I tried the usual of putting it in the tray. I probably had it in the tray a lot longer than the time required in the instructions, but we're not talking minutes. It didn't stick at all.
I then experimented with a couple small pieces (maybe 2" square). I gave one just a quick dunk and slapped it on the wall. The other, I thoroughly sprayed with a squirt bottle of water. Both seemed to stick adequately, with the dunked one doing a bit better.
Since I know I couldn't possibly do a "quick dunk" of a whole sheet, I tried the squirt bottle on a whole sheet. It didn't do much better than the first big sheet. It tried to stick a little but not well enough.
Anyone have any suggestions on how to stick this stuff to the wall? Any secrets to working with aged wallpaper? The total area involved is less than 20 square feet, so normally impractical solutions are perfectly acceptable in this situation. I could go get some wallpaper paste (I guess you can still buy it!) but I don't know if it will work over the stuff that is already on the wallpaper. By the way, I did paint a coating of wall sizing on beforehand. Although at this point, I probably need to put a new layer on the section where I have tried twice.