NH 451 Sickle mower leg dimensions

Poncho

Well-known member
I would like to find the dimensions of the 451 mower legs if anyone has them. Are they solid or pipe. The holes on machine are 3/4 inches. I can’t find legs and would like to make some for convenience. My part manual does not show them very well. Thanks
 
Legs?

How about a picture!

My 450 has a built in stands that holds it up off the ground when detached from the tractor!

Is that what your talking about?
 
Yes there are pipes welded on the mower. Just wondering how far off the ground the mower should be with stands in place. If 8-10 inches. I’m just going to use 3/4 pipe and bend at 90 degree angle. Thanks
 
Poncho":2nfwq3jp said:
Was also wondering if u could measure from ground to the bottom of frame. Thanks

Sorry for such a delay! They are made from 3/4" solid round bar.

A517961E-B34C-4929-A1BB-33B6E3043AF5.jpeg

11BDA3DE-D8DA-4BBD-A946-4FC3B6CC1F30.jpeg

I will post some pics with a tape measure soon as they are resized
 
Thanks a lot. That will help from it tipping over and bit easier for hooking and unhooking.
 
Back
Top