New Trailer Suggestions

Depends on how it's made. I have seen them with hydraulics that raise and hold it up.

A couple thoughts about Trailer GVWR (Gross Vehicle Weight Rating); keep in mind it is usually the weakest link that sets the amount. Tires, wheels, hubs, axles all contribute. You may have two 7,500 axles which would be 15,000 lbs but if you have four tires rated for 2,000 lbs on them then your Trailer GVWR is 8,000 lbs.

Make sure you understand how they come up with the GVWR stamped on the trailer. There are a couple different ways to do it and if you are thinking they used method "A" and they used method "B" you could be "C"ing Mr. "D"OT get upset. :(
 
John *.?-!.* cub owner":1d1wlx7e said:
In my opinion the best way to get a trailer is to convince a friend to buy it then offer to store it for him. :lol:

You are right there.... but I am on the wrong side..... :cry:
 

Attachments

  • 20131223_133732_resized.jpg
    20131223_133732_resized.jpg
    236.7 KB · Views: 225
John *.?-!.* cub owner":bk49tu15 said:
In my opinion the best way to get a trailer is to convince a friend to buy it then offer to store it for him. :lol:

I like that, John. Good advice!

Also, Scrivet, the actual ball/tongue connection rating. The trailer may be able to carry more weight than the tongue is rated to pull.

I appreciate all the posts from everyone. Good food for thought. I have a buyer for my 14 footer tomorrow, so it looks like I'll be making some decisions real soon. I'll let you know what I decide. Thanks again and have a great weekend!!
 
Since I have never seen your driveway, I only have limited suggestions, but I have seen where people had a problem with where their driveways meet the street causing vehicles to drag that a grating was added at the curb/gutter to raise it up. That being said, I used to have a 16 foot trailer and could get by with it, but since Scrivet and Rabbit Holler Flash own an 18 footer they store under a shed at my place, if I had to buy one of my own it would be an 18 footer, not a 16. At Sikeston, Mp. there are several places that build trailers, and will design what you need. Check if there is a place in your part of the country that also builds them and could come up with a way to raise it some and give more clearance. Of course if you raise it the ramps will need to be longer. I wonder about putting a tag axle with smaller wheels close to the rear to keep it from dragging. Wouldn't need springs on them.
 
John *.?-!.* cub owner":582obu5w said:
I wonder about putting a tag axle with smaller wheels close to the rear to keep it from dragging. Wouldn't need springs on them.
I've seen big castor wheels on the backs of motor homes. My trailers both drag heavily coming in or out of my driveway. I just let the 16' trailer drag, leaving marks on both the drive and the street. I put some 4x4 rubbing blocks on the back of the frame of the gooseneck. Usually, I can go in or out and only the blocks drag. I've had the trailer about 10 years and worn out one set of blocks (needed replacement when about an inch was gone to keep other parts of the trailer from dragging).
 
Officially sold my trailer this morning. Also found out that when I pulled out of my driveway to the north (right), it didn't drag at all. :wink: I always pull out to the south (left) because that's the way to the highway and all the tractor shows. That's when it scrapes a little. The road out in front of my house slopes from south down to north (left to right), to I might be able to get away with a longer trailer 16'-18' and just turn to the right (go the back road to the highway).

Anyway, will start the search soon.
 
Looked at a local trailer retailer yesterday (Sunday), they were closed but encourage visitors. Saw an 18'x7' (16' flat w/ 2' dovetail) that the rear bottom clearance appears to be higher than my old trailer. That opens up several options. Also got to compare a 16' and an 18' side by side and agree that an 18' might be better.

Will let you know what I end up with... :coffee:
 
Stanton":3k2bpary said:
Also got to compare a 16' and an 18' side by side and agree that an 18' might be better.

Will let you know what I end up with... :coffee:

I don't think I've ever heard someone say, I wish my trailer was just a couple feet shorter. :lol: :lol:
 
Barnyard":27qlm6qw said:
ricky racer":27qlm6qw said:
Another option since the trailer length or beaver tail may cause dragging problems is a tilt deck. The tilt deck eliminates the need for a beaver tail so the tail will set higher and besides that, they're pretty cool... :wink:

feb4274796d93ff716e9650163a77fb8_M.jpg
The problem I see with that is when you have two pieces of equipment to load. If you haul two Cubs, the front will tilt down once the first Cub is loaded. If you try to drive on it while pulling an implement, it may drop down as soon as the heavier weight of the tractor goes over center causing a lighter implement to hang off the back if it hasn't gotten on the trailer.
Most of the commercially built versions I have seen tilt hydraulically. To me they don't look like they would pull good though--axles are too near the center.

Several tractor friends have gooseneck deck-over trailers with hydraulic dovetails--the entire deck is hinged behind the rear axles and tilts to the ground for loading. To me that would be the way to go for someone wanting a tilt bed.

Al
 
Ricky, maybe not too long, but I bet some have said "I wish this trailer was lighter" . Have seen home made trailers that probably weighed more than the expected load.
 
Super A":19s6f4ge said:
........Several tractor friends have gooseneck deck-over trailers with hydraulic dovetails--the entire deck is hinged behind the rear axles and tilts to the ground for loading. To me that would be the way to go for someone wanting a tilt bed.
Al
Those are nice, but you are talking some BIG dollars there.
 
John *.?-!.* cub owner":vtxkxr6m said:
Super A":vtxkxr6m said:
........Several tractor friends have gooseneck deck-over trailers with hydraulic dovetails--the entire deck is hinged behind the rear axles and tilts to the ground for loading. To me that would be the way to go for someone wanting a tilt bed.
Al
Those are nice, but you are talking some BIG dollars there.


Agree. That's one of the reasons I don' have one! :wink: I'd also have to buy a dually to pull it...

Al
 
Back
Top